Specifications

The intermetallic compound thickness is critical in

the formation of a solder joint. Connection Validation

(CV) evaluates the quality of the solder joint by

calculating the intermetallic compound formation and

provides closed loop feedback to the operator.

CV provides feedback to the operator via the LED

light ring integrated in the hand-piece. It takes the

risk associated with the variables involved in the

soldering activity and removes the success and failure

determination of a good solder joint out of the hands

of the operator.

CV complements the skill of the operator to judge

the quality of a solder joint by introducing an

objective method of evaluating solder joint quality.

This systemic and objective approach provides

repeatability and a measureable standard to the

soldering process.

CV-5200 Series

Connection Validation™ Soldering Station

Features and Benefits

•

SmartHeat® Power-on-Demand Technology

•

Patented ConnectionValidation IMC Formation

Technology

•

2.8” color touchscreen with bold graphics

•

Communications Port for process traceability

data and firmware graphics

•

Integrated Net Power Meter and power graph

°

With optional precise tip temperature display

•

Patented Chip-in-Cartridge technology

°

Closed-loop bi-directional communication

°

Stores and records cartridge attributes

°

Provides traceability information

°

Protects power supply from non-conforming

cartridges

°

Backwards compatible with MX series power

supplies

•

Password protection

Tip temperature displayed

on large color screen.

LED equipped hand piece

signals to operator when

a good solder joint is

formed.

CV-5200 Connection Validation Power Supply

Ambient Operating Temp.

10 to 40 °C

Max. Enclosure Temp.

55°C

Input Line Voltage

100 – 240 VAC, grounded circuit

Input Line Frequency

50/60 Hz

Rated Power Consumption

125W

Output Power

80W max.

Output Frequency

13.56 MHz

Heating Method

Induction

Display

2.8” Color TFT LCD Display

Resolution

320*240 RGB

Size

2.8” Diagonal

Active Area

43.20 x 57.60 mm

Connections

Single Port

Communications

USB

Power Supply Dim. w x d x h

(mm)

121 x 130 x 235

Power Supply Weight (kg)

3.35

Certification / Marking

CE TUV

Tip-to- Ground Potential

<2mV

Tip-to-Ground Resistance

<2ohms

Idle Temperature Stability

1.1°C in still air

Tip Temperature Accuracy

Meets or exceeds IPC J-STD-001

Standard

Hand-piece cable length

L=183cm (72”), burn proof, ESD

safe

Hand-piece connectors

RF Connector

F type power connector

LED Power Connector

6 pin DIN

Operation

2 single port or dynamic dual

simultaneous

Firmware upgrade

Via USB port and appropriate

software with compatible

computer and cables.

System Configuration

Technical Specifications

The CV-5210 soldering station includes:

•

CV Power supply

•

CV-H1-AV: Advanced hand-piece switch with

integrated LED light*

•

MX-W1AV: TipSaver Workstand*

Additional system configurations will be available soon.

*Can be ordered separately.