| Electronic Components Datasheet Search |
|
UPSD3422 Datasheet(PDF) 115 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
UPSD3422 Datasheet(HTML) 115 Page - STMicroelectronics |
|
115 / 293 page ![]() uPSD34xx I2C interface 115/293 23 I2C interface uPSD34xx devices support one serial I2C interface. This is a two-wire communication channel, having a bi-directional data signal (SDA, pin P3.6) and a clock signal (SCL, pin P3.7) based on open-drain line drivers, requiring external pull-up resistors, RP, each with a typical value of 4.7k Ω (see Figure 41). 23.1 I2C interface main features Byte-wide data is transferred, MSB first, between a Master device and a Slave device on two wires. More than one bus Master is allowed, but only one Master may control the bus at any given time. Data is not lost when another Master requests the use of a busy bus because I2C supports collision detection and arbitration. The bus Master initiates all data movement and generates the clock that permits the transfer. Once a transfer is initiated by the Master, any device addressed is considered a Slave. Automatic clock synchronization allows I2C devices with different bit rates to communicate on the same physical bus. A single device can play the role of Master or Slave, or a single device can be a Slave only. Each Slave device on the bus has a unique address, and a general broadcast address is also available. A Master or Slave device has the ability to suspend data transfers if the device needs more time to transmit or receive data. This I2C interface has the following features: ● Serial I/O Engine (SIOE): serial/parallel conversion; bus arbitration; clock generation and synchronization; and handshaking are all performed in hardware ● Interrupt or Polled operation ● Multi-master capability ● 7-bit Addressing ● Supports standard speed I2C (SCL up to 100kHz), fast mode I2C (101KHz to 400kHz), and high-speed mode I2C (401KHz to 833kHz) Figure 41. Typical I2C bus configuration Note: 1 For 3.3V system, connect RP to 3.3V VCC. For 5.0V system, connect RP to 5.0V VDD. I2C BUS SDA SCL RP RP VCC or VDD (1) Device with I2C Interface Device with I2C Interface SDA/P3.6 SCL/P3.7 uPSD34XX(V) Device with I2C Interface AI09623b |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |