IDEC Corporation • 1175 Elko Drive • Sunnyvale, CA 94089 • 800-262-IDEC (4332) • Fax: 408-745-5258 • www.IDEC.com/usa

©2017 IDEC Corporation. All Rights Reserved. FC9Y-DS300-0e 10/17 PDF Only

8.2

4.0

130.9

114.3

73.0

70.0

12.6

4.0

114.3

130.9

73.0

70.0

TRANSISTOR OUTPUT SPECIFICATIONS

*1: This overcurrent signals consist of one signal per 4 point outputs. When microprocessor gets this overcurrent signal by interrupt input, microprocessor turns off 4pt outputs of this category at fixed time (approx. 1sec).

Plus CPU Modules

DIMENSIONS (mm)

FC6A–D32K3CEE

FC6A–D32P3CEE

FC6A–D16R1CEE

FC6A–D16K1CEE

FC6A–D16P1CEE

RELAY OUTPUT SPECIFICATIONS (CON'T)

Part No.

FC6A-C16P1CEE

FC6A-C16K1CEE

FC6A–D32P3CEE

FC6A–D32K3CEE

Transistor Output Points

8 (8/1 common)

16 (16/1 common)

Output Type

Transistor Sink

FC6A–D16K1CEE/FC6A–D32K3CEE

Transistor Source

FC6A–D16P1CEE/FC6A–D32P3CEE

Rated Load Voltage

24V DC

Voltage Tolerance

19.2 to 28.8V DC

Rated Load

Current

Per Point

0.5A

0.1A

Per Common

4.0A

1.6A

Output Delay

Turn ON Time

High speed input port: 5μs

Normal speed input port: 300μs

Turn OFF Time

High speed input port: 5μs

Normal speed input port: 300μs

Isolation

Between output terminal and Internal circuit:

Optocoupler-isolated

Between output terminals:Not isolated

Voltage Drop (ON Voltage)

1V max (voltage between COM and output terminal when output is on.)

Inrush Current

1A

0.2A

Leakage Current

0.1mA maximum

Clamping Voltage

39V ±1V

Maximum Lamp Load

12W

2.4W

Inductive Load

L/R=10ms (28.8V DC, 1Hz)

Overcurrent Protection

Transistor Sink Output:

No

Transistor Source Output: Overcurrent is detected by current limit resistance. (*1)

External Current Draw

100mA maximum, 24V DC (power voltage at the +V terminal, -V terminal at source)

Connector

Insertion Durability

100 times minimum

Applicable Ferrule

1-wire: AI 0.5-8 WH (Phoenix Contact)

2-wire: AI-TWIN 2×0.5-8 WH (Phoenix Contact)

—

Electrical Life

100,000 operations minimum (rated resistive load 1,800 operations/hour)

Mechanical Life

20,000,000 operations minimum (no load 18,000 operations/hour)

Rated Load

Resistive load: 240V AC 2A, 30V DC 2A

Inductive load: 240V AC 2A (cos ø = 0.4), 30V DC 2A (L/R =7 ms)

Connector

Insertion/Removal Durability 100 times minimum

Applicable Ferrule

1-wire: AI 0.5-8 WH (Phoenix Contact)

2-wire: AI-TWIN 2×0.5-8 WH (Phoenix Contact)