Installing the Software and Setting up the Hardware

KTMPC5744DBUG Rev. 1.0 2/2015

Freescale Semiconductor, Inc.

15

4

Installing the Software and Setting up the Hardware

4.1

Installing the GUI on your Computer

The Graphical User Interface (GUI) software is dedicated to the MC33907_8 development boards. To install the GUI successfully please

follow these steps:

1. Make sure that the KIT33908MBEVBE is disconnected from the PC.

2. Launch “setup.exe” as shown in Figure 6.

Figure 6. GUI Installation

3. Follow instructions of the automatic installer.

4. Connect the KIT33908MBEVBE to the PC – installation of the drivers starts automatically.

5. Launch the GUI when the installation is finished (restart is not required).