
IMAGE SENSOR SOLUTIONS
Revision Changes
No.
Date
Description of Revision
0
02/05/1993
•
Revision 0 is the original version of the document
1
04/26/1993
•
Revision 1 changes name from KAI-1001C to KAI-1001 series and includes data on all
series imagers
2
12/20/1995
•
Entire spec revised
3
04/27/1998
•
Entire spec revised
4
09/16/1998
•
Changed from KAI-1001 series to KAI-1010. Added cluster closeness specification, 4
good pixels between cluster defects.
5
4/23/1999
•
Changed defect and grades.
•
Added frame rate table and angle QE.
6
6/18/1999
•
Added Web and e-mail references to footers.
•
Added pixel 1,1 locator to figure 7, Pinout diagram.
•
Corrected missing reference to figure 16 in Electro-Optical for KAI-1010CM note 2.
•
Removed reference to KAI-1001 from both color and mono QE curves.
•
Removed boxes around vertical and horizontal labels on angle QE figure.
•
Removed boxes around labels on frame rate figure, added arrows from labels to curves.
•
Corrected figure 21 Vsat versus Vsub plot to properly position labels.
•
Added Web and e-mail references in section 4.3 ordering information.
•
Corrected repeat table 4 entry.
•
Corrected frame rate versus horizontal clock frequency figure. Data for dual mode was
incorrect.
7
10/13/1999
•
Changed figure 6 label from Device Drawing #6 Die Placement to Device Drawing – Die
Placement.
•
Added figure 16, Fast Dump Timing.
•
Added figure 17, Binning – 2 to 1 line binning.
•
Added figure 18, Sample Video Waveform at 5MHz.
•
In Appendix 1, Part Numbers, changed references from taped on glass to snap-on lid.
8
10/28/2002
•
Updated page layout.
•
Color version of part updated to use improved material. Naming of color part changed
from KAI-1010CM to KAI-1011CM.
•
Page 13 – Added cautions pertaining to ESD and glass cleaning.
•
Page 26 – Color PRNU value changed from 5 to 15. Units clarified to % Peak to Peak.
•
Page 28 – Monochrome PRNU value changed from 5 to 10. Units clarified to % Peak to
Peak.
•
Page 27 – Updated color quantum efficiency graph to new KAI-1011CM.
•
Page 35 – Updated quality Assurance and Reliability section.
•
Page 36 – Appendix 1 replaced with Available Part Configurations.
KAI-1010/1011 Rev 8 •
www.k odak.com/go/imagers 585-722- 4385 imagers@kodak.com
37