H8SLASH3028F datasheet(543/923 Pages) RENESAS

543 / 923 page

Rev. 2.00, 09/03, page 513 of 890

Section 14 Smart Card Interface

14.1

Overview

An IC card (smart card) interface conforming to the ISO/IEC 7816-3 (Identification Card)

standard is supported as an extension of the serial communication interface (SCI) functions.

Switchover between the normal serial communication interface and the smart card interface is

controlled by a register setting.

14.1.1

Features

Features of the smart card interface supported by the H8/3028 Group are listed below.

• Asynchronous communication

 Data length: 8 bits

 Parity bit generation and checking

 Transmission of error signal (parity error) in receive mode

 Error signal detection and automatic data retransmission in transmit mode

 Direct convention and inverse convention both supported

• Built-in baud rate generator allows any bit rate to be selected

• Three interrupt sources

 There are three interrupt sources—transmit-data-empty, receive-data-full, and

transmit/receive error—that can issue requests independently.

 The transmit-data-empty interrupt and receive-data-full interrupt can activate the DMA

controller (DMAC) to execute data transfer.

H8/3028F Datasheet(PDF) 543 Page - Renesas Technology Corp