H8SLASH3028F datasheet(68/923 Pages) RENESAS

68 / 923 page

Rev. 2.00, 09/03, page 38 of 890

2.6.4

Basic Instruction Formats

The H8/300H instructions consist of 2-byte (1-word) units. An instruction consists of an operation

field (OP field), a register field (r field), an effective address extension (EA field), and a condition

field (cc).

Operation Field: Indicates the function of the instruction, the addressing mode, and the operation

to be carried out on the operand. The operation field always includes the first 4 bits of the

instruction. Some instructions have two operation fields.

by 3 bits or 4 bits. Some instructions have two register fields. Some have no register field.

Effective Address Extension: Eight, 16, or 32 bits specifying immediate data, an absolute

address, or a displacement. A 24-bit address or displacement is treated as 32-bit data in which the

first 8 bits are 0 (H'00).

Condition Field: Specifies the branching condition of Bcc instructions.

Figure 2.9 shows examples of instruction formats.

NOP, RTS, etc.

EA (disp)

Operation field only

ADD.B Rn, Rm, etc.

Operation field and register fields

MOV.B @(d:16, Rn), Rm

Operation field, register fields, and effective address extension

BRA d:8

Operation field, effective address extension, and condition field

EA (disp)

Figure 2.9 Instruction Formats

H8/3028F Datasheet(PDF) 68 Page - Renesas Technology Corp