AT90SCR100 datasheet(237/433 Pages) ATMEL

237 / 433 page

237

TPR0327AY–SMS–30Jan09

AT90SCR100

the Global Interrupt Flag should be cleared (and interrupts globally disabled) when doing the

initialization.

Before doing a re-initialization with changed baud rate or frame format, be sure that there are no

ongoing transmissions during the period the registers are changed. The TXC0 Flag can be used

to check that the Transmitter has completed all transfers, and the RXC Flag can be used to

check that there are no unread data in the receive buffer.

The following simple USART initialization code examples show one assembly and one C func-

tion that are equal in functionality. The examples assume asynchronous operation using polling

(no interrupts enabled) and a fixed frame format. The baud rate is given as a function parameter.

For the assembly code, the baud rate parameter is assumed to be stored in the r17:r16

Registers.

Note:

1. See “About Code Examples” on page 11.

More advanced initialization routines can be made that include frame format as parameters, dis-

able interrupts and so on. However, many applications use a fixed setting of the baud and

control registers, and for these types of applications the initialization code can be placed directly

in the main routine, or be combined with initialization code for other I/O modules.

The TXC0 Flag must be cleared before each transmission (before UDR0 is writ-

ten) if it is used for this purpose.

Assembly Code Example(1)

USART_Init:

; Set baud rate

out

UBRRH0, r17

out

UBRRLn0 r16

; Enable receiver and transmitter

ldi

r16, (1<<RXEN0)|(1<<TXEN0)

out

UCSR0B,r16

; Set frame format: 8data, 2stop bit

ldi

r16, (1<<USBS0)|(3<<UCSZ00)

out

UCSR0C,r16

ret

C Code Example (1)

void

USART_Init( unsigned int baud )

{

/* Set baud rate */

UBRRH0 = (unsigned char)(baud>>8);

UBRRL0 = (unsigned char)baud;

/* Enable receiver and transmitter */

UCSR0B = (1<<RXEN0)|(1<<TXEN0);

/* Set frame format: 8data, 2stop bit */

UCSR0C = (1<<USBS0)|(3<<UCSZ00);

}

Note

AT90SCR100 Datasheet(PDF) 237 Page - ATMEL Corporation

AT90SCR100 Datasheet(HTML) 237 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL