AT90SCR100 datasheet(239/433 Pages) ATMEL

239 / 433 page

239

TPR0327AY–SMS–30Jan09

AT90SCR100

18.7.2

Sending Frames with 9 Data Bit

If 9-bit characters are used (UCSZ0 = 7), the ninth bit must be written to the TXB8 bit in

UCSR0B before the low byte of the character is written to UDR0. The following code examples

show a transmit function that handles 9-bit characters. For the assembly code, the data to be

sent is assumed to be stored in registers R17:R16.

Note:

1. These transmit functions are written to be general functions. They can be optimized if the con-

tents of the UCSR0B is static. For example, only the TXB8 bit of the UCSR0B Register is used

after initialization. See “About Code Examples” on page 11.

The ninth bit can be used for indicating an address frame when using multi processor communi-

cation mode or for other protocol handling as for example synchronization.

18.7.3

Transmitter Flags and Interrupts

The USART Transmitter has two flags that indicate its state: USART Data Register Empty

(UDRE0) and Transmit Complete (TXC0). Both flags can be used to generate interrupts.

The Data Register Empty (UDRE0) Flag indicates whether the transmit buffer is ready to receive

new data. This bit is set when the transmit buffer is empty, and cleared when the transmit buffer

contains data to be transmitted that has not already been moved into the Shift Register. For

compatibility with future devices, always write this bit to zero when writing the UCSR0A Register.

Assembly Code Example(1)

USART_Transmit:

; Wait for empty transmit buffer

sbis

UCSR0A,UDRE0

rjmp

USART_Transmit

; Copy 9th bit from r17 to TXB8

cbi

UCSR0B,TXB8

sbrc

r17,0

sbi

UCSR0B,TXB8

; Put LSB data (r16) into buffer, sends the data

out

UDR0,r16

ret

C Code Example (1)

void

USART_Transmit( unsigned int data )

{

/* Wait for empty transmit buffer */

while

( !( UCSR0A & (1<<UDRE0))) )

;

/* Copy 9th bit to TXB8 */

UCSR0B &= ~(1<<TXB8);

if ( data & 0x0100 )

UCSR0B |= (1<<TXB8);

/* Put data into buffer, sends the data */

UDR0 = data;

}

AT90SCR100 Datasheet(PDF) 239 Page - ATMEL Corporation

AT90SCR100 Datasheet(HTML) 239 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL