KTPF0100UG datasheet(30/74 Pages) FREESCALE

30 / 74 page

KTPF0100UG, Rev. 2.0

Freescale Semiconductor

Graphical User Interface Description

10 Graphical User Interface Description

The KITPF0100 GUI is based on a tabbed interface. Each tabs can be selected to display a window associated

with one functional aspect of the PF0100 device.

10.1

Getting Started

1. Supply 3.6V to J25 of the EVK board, then connect the USB cable from the USB-MiniB port (J34) to the

computer. J30 should be in position (2-3); otherwise, you will receive an error message.

2. Press the “Open Session” button to search for the PF Programmer device.

3. The “Select Resource” dialog box should pop up, and you should see the KITPF0100EPEVBE device

listed. The USB Vendor ID is 0x15A2, and the Part ID is 0x00F5 for the KITPF0100EPEVBE.

Select the device and press the “OK” button.

Figure 24. OPEN USB Connection

4. The “Select Resource” dialog should close, and the Log List will display a message that you are connected

to the KITPF0100EPEVBE. The Vendor ID and Part ID will also be displayed to let you know that you are

connected to the right device.

•

The Log List can be saved to a text file at any time by pressing the “Save Log” button, and a "File Save”

dialog box will pop up.

•

The Log List can also be cleared at any time by pressing the “Clear Log” button.

KTPF0100UG Datasheet(PDF) 30 Page - Freescale Semiconductor, Inc