KTPF0100UG datasheet(57/74 Pages) FREESCALE

57 / 74 page

KTPF0100UG, Rev. 2.0

Freescale Semiconductor

Graphical User Interface Description

If you would like the KITPF0100GUI to verify that a part has been programmed with the OTP data supplied by the

programming script, click the “Verify After Programming” check box. This will direct the GUI to do a line-by-line

comparison between the data written and the data actually programmed into the part.

Figure 48. Verify After Programming and OTP Blank?

Then press the “PROGRAM” button. The KITPF0100GUI will verify that the script file has been loaded and the

supply voltages have been applied before starting the programming sequence. Each step of the programming

sequence will be displayed in the Log List.

When the programming sequence turns on the 8.0V VPGM programming supply, then the red LED D11 of the

KITPF0100EPEVBE will be on.

After programming has been completed, the GUI will automatically check to see if the OTP memory has been

programmed, and because we selected “Verify” afterwards, the verify algorithm will be run. The number of OTP

programming errors will be reported in the Log List.

KTPF0100UG Datasheet(PDF) 57 Page - Freescale Semiconductor, Inc