A43L0616AV datasheet(10/45 Pages) AMICC

10 / 45 page

A43L0616A

(May, 2001, Version 1.0)

AMIC Technology, Inc.

Simplified Truth Table

Command

CKEn-1 CKEn

RAS CAS

DQM

BA A10/

A9~A0

Notes

Mode Register Set

OP CODE

1,2

Auto Refresh

Entry

Refresh

Self

Refresh

Exit

Bank Active & Row Addr.

Row Addr.

Auto Precharge Disable

Read &

Column Addr. Auto Precharge Enable

Column

Addr.

4,5

Auto Precharge Disable

Write &

Column Addr. Auto Precharge Enable

Column

Addr.

4,5

Burst Stop

Bank Selection

Precharge

Both Banks

Entry

Clock Suspend or

Active Power Down

Exit

Entry

Precharge Power Down Mode

Exit

DQM

No Operation Command

(V = Valid, X = Don’t Care, H = Logic High, L = Logic Low)

Note : 1. OP Code : Operand Code

A0~A10/AP,BA : Program keys. (@MRS)

2. MRS can be issued only at both banks precharge state.

A new command can be issued after 2 clock cycle of MRS.

3. Auto refresh functions as same as CBR refresh of DRAM.

The automatical precharge without Row precharge command is meant by “Auto”.

Auto/Self refresh can be issued only at both precharge state.

4. BA : Bank select address.

If “Low” at read, write, Row active and precharge, bank A is selected.

If “High” at read, write, Row active and precharge, bank B is selected.

If A10/AP is “High” at Row precharge, BA is ignored and both banks are selected.

5. During burst read or write with auto precharge, new read write command cannot be issued.

Another bank read write command can be issued at every burst length.

6. Burst stop command is valid at every burst length.

7. DQM sampled at positive going edge of a CLK masks the data-in at the very CLK (Write DQM latency is 0),

but makes the data-out Hi-Z state after 2 CLK cycles. (Read DQM latency is 2)

A43L0616AV Datasheet(PDF) 10 Page - AMIC Technology

A43L0616AV Datasheet(HTML) 10 Page - AMIC Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

Datasheet Download

Link URL