Temperature sensor application description

AN3397

10/24

Doc ID 018809 Rev 1

2.3

STM8L-DISCOVERY hardware settings

The IDD jumper (see Figure 3), JP1, should be placed in the ‘off’ position.

Both jumpers on CN3 must be fitted to enable communication between the STM8L

microcontroller and the ST-LINK debugging tool through the serial wire interface module

(SWIM).

Note:

Refer to UM0970 STM8L-DISCOVERY user manual for details.

Figure 3.

STM8L-DISCOVERY hardware settings

ai18784

IDD jumper