PIC17C752-08SLASHP datasheet(173/320 Pages) MICROCHIP

173 / 320 page

Preliminary

DS30264A-page 173

PIC17C75X

16.4.1

A/D RESULT REGISTERS

The ADRESH:ADRESL register pair is the location

where the 10-bit A/D result is loaded at the completion

of the A/D conversion. This register pair is 16-bits wide.

The A/D module gives the ﬂexibility to left or right justify

the 10-bit result in the 16-bit result register. The A/D

Format Select bit (ADFM) controls this justiﬁcation.

Figure 16-5 shows the operation of the A/D result justi-

ﬁcation. The extra bits are loaded with ’0’s’. When an

A/D result will not overwrite these locations (A/D dis-

able), these registers may be used as two general pur-

pose 8-bit registers.

16.5 A/D Operation During Sleep

The A/D module can operate during SLEEP mode. This

requires that the A/D clock source be set to RC

(ADCS1:ADCS0 = 11). When the RC clock source is

selected, the A/D module waits one instruction cycle

before starting the conversion. This allows the SLEEP

instruction to be executed, which eliminates all digital

switching noise from the conversion. When the conver-

sion is completed the GO/DONE bit will be cleared, and

the result loaded into the ADRES register. If the A/D

interrupt is enabled, the device will wake-up from

SLEEP. If the A/D interrupt is not enabled, the A/D mod-

ule will then be turned off, although the ADON bit will

remain set.

When the A/D clock source is another clock option (not

RC), a SLEEP instruction will cause the present conver-

sion to be aborted and the A/D module to be turned off,

though the ADON bit will remain set.

Turning off the A/D places the A/D module in its lowest

current consumption state.

Note: For the A/D module to operate in SLEEP,

the A/D clock source must be set to RC

(ADCS1:ADCS0 = 11). To allow the con-

version to occur during SLEEP, ensure the

SLEEP

instruction immediately follows the

instruction that sets the GO/DONE bit.

FIGURE 16-5: A/D RESULT JUSTIFICATION

10-Bit Result

ADRESH

ADRESL

0000 00

ADFM = 0

2 1 0 7

10-bits

RESULT

ADRESH

ADRESL

10-bits

0000 00

0 7 6 5

RESULT

ADFM = 1

Right Justiﬁed

Left Justiﬁed

PIC17C752-08/P Datasheet(PDF) 173 Page - Microchip Technology

PIC17C752-08/P Datasheet(HTML) 173 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL