| Electronic Components Datasheet Search |
|
TUSB3410 Datasheet(PDF) 62 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TUSB3410 Datasheet(HTML) 62 Page - Texas Instruments |
|
62 / 92 page ![]() 9–2 9.1.3 VECINT: Vector Interrupt Register (Addr:FF92) This register contains a vector value, which identifies the internal interrupt source that trapped to location 0003H. Writing (any value) to this register removes the vector and updates the next vector value (if another interrupt is pending). Note: the vector value is offset; therefore, its value is in increments of two (bit 0 is set to 0). When no interrupt is pending, the vector is set to 00h (see Table 9–2). As shown, the interrupt vector is divided to two fields: I[2:0] and G[3:0]. The I field defines the interrupt source within a group (on a first-come-first-served basis). In the G field, which defines the group number, group G0 is the lowest, and G15 is the highest priority. 765 4 3 2 1 0 G3 G2 G1 G0 I2 I1 I0 0 R/O R/O R/O R/O R/O R/O R/O R/O BIT NAME RESET FUNCTION 3–1 I[2:0] 0H This field defines the interrupt source in a given group. See Table 9–2. Bit 0 = 0 always; therefore, vector values are offset by two. 7–4 G[3:0] 0H This field defines the interrupt group. I[2:0] and G[3:0] combine to produce the actual interrupt vector. Table 9–2. Vector Interrupt Values G[3:0] (Hex) I[2:0] (Hex) VECTOR (Hex) INTERRUPT SOURCE 0 0 00 No interrupt 1 0 10 Not used 1 1 1 1 2 3 12 14 16 Output endpoint-1 Output endpoint-2 Output endpoint-3 2 0 20 Not used 2 2 2 3 3 3 3 3 3 3 3 1 2 3 0 1 2 3 4 5 6 7 22 24 26 30 32 34 36 38 3A 3C 3E Input endpoint-1 Input endpoint-2 Input endpoint-3 STPOW packet received SETUP packet received RESERVED RESERVED RESR interrupt SUSR interrupt RSTR interrupt Reserved 4 4 4 4 0 1 2 3 40 42 44 46 I2C TXE interrupt I2C RXF interrupt Input endpoint-0 Output endpoint-0 4 4–7 48 → 4E Not used 5 5 5 0 1 4–7 50 52 58 → 5E UART status interrupt UART modem interrupt Not used 6 6 6 7 0 1 4–7 5–7 60 62 68 → 6E 70 → 7E UART RXF interrupt UART TXE interrupt Not used Not used 8 8 8 0 2 5–7 80 84 88–8E DMA1 interrupt DMA3 interrupt Not used 9–15 X 90 → FE Not used |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |