TVP7002IPZP datasheet(21/58 Pages) TI1

21 / 58 page

TVP7002

www.ti.com

SLES206C – MAY 2007 – REVISED APRIL 2013

Output Range Limits

The TVP7002 provides selectable output range limits in I2C subaddress 15h:

00 = RGB coding range (Y, Cb, and Cr range from 0 to 1023) (default)

01 = Extended coding range (Y, Cb, and Cr range from 4 to 1019)

10 = ITU-R BT.601 coding range (Y ranges from 64 to 940, Cb and Cr range from 64 to 960)

11 = Reserved

NOTE

RGB coding range not allowed with embedded syncs.

Power Management

The TVP7002 supports both automatic and manual power-down modes. The automatic power-down mode can

be selected by setting bit 2 of subaddress 0Fh to logic 0.

In the automatic power-down mode, the TVP7002 powers down the ADCs, the ADC reference, and horizontal

PLL when activity is not detected on both the selected HSYNC input and the selected SOG input (VSYNC is no

longer used). The TVP7002 restores power whenever activity is detected on either the selected HSYNC input or

the selected SOG input.

The TVP7002 can also be placed in power-down mode via the active-high PWDN input (pin 70). When the

PWDN input is driven high, the TVP7002 powers down everything including the I2C interface, and the digital

outputs are not placed in a high-impedance mode.

The TVP7002 can also be placed in a power-down mode using bit 1 of register 0Fh.

Individual blocks of the TVP7002 can be independently powered down using register 2Bh.

Submit Documentation Feedback

Product Folder Links: TVP7002

TVP7002IPZP Datasheet(PDF) 21 Page - Texas Instruments