LP064V1 LIQUID CRYSTAL DISPLAY

SPECIFICATIONS

TITLE: LP064V1 REV. 1 PAGE 3 OF 3

DATA DISPLAY AG

Industriestrasse 1

D-82110 Germering

MAY 2001

http://www.datadisplay.de

Tel.: +49-89-894450-0

Fax: +49-89-894450-90

2.

MAXIMUM RATINGS

The following are maximum values which, if exceeded, may cause faulty operation

or damage to the unit.

Table 1: ABSOLUTE MAXIMUM RATINGS

Parameter

Symbol

Values

Units

Notes

Min.

Max.

Power Input Voltage

Logic Input Voltage

Operating Temperature

Storage Temperature

-0.5

0

0

-20

+5.5

+50

+60

Vdc

Vdc

°C

°C

at 25°

at 25°

1

1

Note 1:

The Relative Humidity must not exceed 80% non-condensing at

temperatures of 50° or less. At temperatures greater than 40°, the wet

bulb temperature must not exceed 49°. At low temperature the brightness

of CCFT drop and the life time of CCFT become to be short.

Note 2:

Under no condition should the unit be exposed to corrosive chemicals.

3.

ELECTRICAL SPECIFICATIONS

The LP064V1 requires two power inputs. One is employed to power the LCD

electronics and to derive the voltages to drive the TFT array and liquid crystal. The

second input which powers the backlight CCFT, is typically generated by an inverter.

The inverter is an external unit to the LCD.