STM32F383RC datasheet(123/125 Pages) STMICROELECTRONICS

123 / 125 page

DocID023367 Rev 2

123/125

STM32F383xx

Revision history

124

Revision history

Table 78. Document revision history

Date

Revision

Changes

18-Jan-2013

Initial release.

19-Sep-2013

Replaced “Cortex-M4F” with “Cortex-M4” throughout the

document.

Removed part number STM32F382xx.

Added “1.25 DMIPS/MHz (Dhrystone 2.1)” in Features.

Removed all references to pin PB2.

Updated Introduction.

Added reference to the STMTouch touch sensing firmware

library in Section 3.16: Touch sensing controller (TSC).

Added “All I2S interfaces can operate in half-duplex mode

only.” in Section 3.21: Serial peripheral interface (SPI)/Inter-

integrated sound interfaces (I2S).

Modified introduction of I2C interface characteristics.

Added alternate function RTC_REFIN and removed additional

function RTC_REF_CLK_IN to pins PA1 and PB15.

Replaced alternate function JNTRST with NJTRST for pin

PB4.

Replaced alternate function TIM1_TX with USART1_TX for

pin PC4 and TIM1_RX with USART1_RX for pin PC5.

Added alternate functions TIM4_CH1 and TSC_G8_IO1 to

pin PD12. Removed additional functions TIM4_CH1 and

G8_IO1 from pin PD12.

Added row “I2S full-duplex mode” to Table 9: STM32F383xx

SPI/I2S implementation.

In Table 12: Alternate functions for port PA: replaced alternate

function JTMS-SWDIO with SWDIO-JTMS for pin PA13, and

JTCK-SWCLK with SWCLK-JTCK for pin PA14.

In Table 22: General operating conditions: added rows VREF+

and VREFSD+; changed minimum value of VDDSD12 (‘SDADC

not used’ condition) from 2.0 to 1.65.

Replaced table column heading "Typ@VDD (VDD = VDDA =

1.8 V)" with "Typ@VDD (VDD=1.8 V, VDDA=3.3 V)" in

Table 28: Typical and maximum VDD consumption in Stop

mode.

Updated Table 29: Typical and maximum VDDA consumption

in Stop mode.

Added conditions for fHSE_ext in Table 35: High-speed external

user clock characteristics.

Added Min and Max values for ACCHISI in Table 39: HSI

oscillator characteristics.

Added COMP in Table 33: Peripheral current consumption

Changed VDDA value from 1.8 to 3.3 V in note(1) under

Table 39: HSI oscillator characteristics and Table 40: LSI

oscillator characteristics.

STM32F383RC Datasheet(PDF) 123 Page - STMicroelectronics

STM32F383RC Datasheet(HTML) 123 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL