SSD1963QL9 datasheet(20/93 Pages) ETC2

Part #	SSD1963QL9

Description	1215KB Embedded Display SRAM LCD Display Controller

PDF	93 Pages

Scroll/Zoom	100%

Manufacturer	ETC2 [List of Unclassifed Manufacturers]

Direct Link

Logo

20 / 93 page

Solomon Systech

Jan 2010

P 20/93

Rev 1.1

SSD1963

Figure 7-3: State Diagram of SSD1963

7.5

LCD Controller

7.5.1

Display Format

The LCD controller reads the frame buffer and generates display signals according to the selected display

panel format. SSD1963 supports common RAM-less TFT driver using generic RGB data format.

7.5.2

General Purpose Input/Output (GPIO)

The GPIO pins can operate in 2 modes, GPIO mode and miscellaneous display signal mode. When the pins are

configured as GPIOs, these pins can be controlled directly by MCU. Therefore, user can use these pins to emulate other

interface such as SPI or I2C. If these pins are configured as display signals, they will toggle with display periodically

according to the signal settings. They can be set to toggle once a frame, once a line or in arbitrary period. Therefore

they can be configured as some common signal needed for different panels such as STH or LP.

SSD1963QL9 Datasheet(PDF) 20 Page - List of Unclassifed Manufacturers