| Electronic Components Datasheet Search |
|
TLE5014 Datasheet(PDF) 31 Page - Infineon Technologies AG |
|
|
|||||||||||||||||||||||||||||
TLE5014 Datasheet(HTML) 31 Page - Infineon Technologies AG |
|
31 / 45 page ![]() Trigger Sync Status & SSM Data 1 Data 2 Data 3 Rolling counter CRC & ID End Short serial message (SSM), with rolling counter Final Datasheet 31 Rev. 1.0 2018-04-04 TLE5014 Interfaces In case the short serial message is enabled, the bits [0] and [1] of the status nibble for address (sensor ID) indication are not available. In this case, the sensor ID is coded in the CRC. Further details in Chapter 4.3.3. Figure 4-7 Example of a SPC protocol frame configuration with short serial message enabled 4.3.2.1 Temperature Calculation The temperature information which is transmitted with the short serial message is an 8-bit value. It has to be considered as a two-complement ranging from T[LSB] = -128LSB ... +127 LSB To obtain the temperature value in °C the following calculation has to be performed: (4.1) 4.3.3 Checksum Nibble Details The checksum nibble is a 4-bit CRC of the data nibbles including the status nibble. The CRC is calculated using a polynomial x4+x3+x2+1 with a seed value of 0101B. The remainder after the last data nibble is transmitted as CRC. Depending on SPC frame configuration, different options for the CRC calculation have to be considered: Short serial message disabled and rolling counter information as nibble: the input data for CRC calculation are: STATUS & DATA1 & DATA2 & DATA3 & ROLLING_COUNTER Rolling counter information is coded in the CRC (no explicit rolling counter nibble): The two LSBs of the rolling counter information is prepended to "00" and added to the input data of the CRC calculation (R1 R0 0 0). In this case, the rolling counter has only 2 bits. Short serial message enabled and rolling counter information transmitted as nibble: the sensor ID is coded in the CRC: the two bit value of the ID on LSB position is appended to “00” and added to the input data of the CRC calculation (0 0 ID1 ID0) Short serial message enabled and the rolling counter information coded in the CRC: the two bit value of the ID on LSB position is appended to the 2LSB value of the rolling counter on MSB position and added to the input data of the CRC calculation (R1 R0 ID1 ID0). In this case, the rolling counter has only 2 bits. T °C [] 2T LSB [] 34.54 + ⋅ 1.3815 ------------------------------------------------ = |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |