6 Specifications

6.1 Absolute Maximum Ratings

See(1)

MIN

MAX

UNIT

Supply Voltage (2)

-0.5

6

V

-0.5

6

Input/Output

Voltage

INx to GNDx

-0.5

V

OUTx to GNDx

-0.5

Output Current

Io

-15

15

mA

Temperature

150

°C

-65

150

°C

(1)

Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress

ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under

Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device

reliability.

(2)

All voltage values except differential I/O bus voltages are with respect to the local ground terminal (GND1 or GND2) and are peak

voltage values

(3)

Maximum voltage must not exceed 6 V.

6.2 ESD Ratings

VALUE

UNIT

Electrostatic discharge

Human body model (HBM), per ANSI/

ESDA/JEDEC JS-001, all pins(1)

±6000

V

Charged device model (CDM), per

JEDEC specification JESD22-C101, all

pins(2)

±1500

Contact discharge per IEC 61000-4-2;

Isolation barrier withstand test(3) (4)

±8000

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

(3)

IEC ESD strike is applied across the barrier with all pins on each side tied together creating a two-terminal device.

(4)

Testing is carried out in air or oil to determine the intrinsic contact discharge capability of the device.

ISO6720, ISO6721, ISO6721R

SLLSFJ0D – JANUARY 2020 – REVISED SEPTEMBER 2021

www.ti.com

4

Submit Document Feedback

Copyright © 2021 Texas Instruments Incorporated

Product Folder Links: ISO6720 ISO6721 ISO6721R