F39-TGR-CVL-B-2-R datasheet(30/98 Pages) OMRON

30 / 98 page

Fixed Blanking

Section 5-1

The user must then press

and release the Start but-

ton or perform a power cy-

cle. The MS4800 receiver

then resets. If no faults are

detected and the state of

the optical beams match-

es the recorded Fixed

Blanking pattern, the re-

ceiver will enter the IN-

TERLOCK or MACHINE RUN condition depending upon the selected Start

Mode. The amber receiver Blanking Active LED will be on.

If the 10 minutes period

expires, the amber LED

and IBIs (Individual Beam

Indicators) quit flashing

and the yellow LED (IN-

TERLOCK) goes on. The

user can start another

programming

sequence

setting

both

Fixed

Blanking switches off and

then on. The user may

start normal operation by a press and release of the start button or by per-

forming a power cycle.

To exit Fixed Blanking the

user sets both selector

switches to the off posi-

tion, then either presses

and releases the Start but-

ton or performs a power

cycle. The receiver will

power up with the amber

LED off.

Note Please refer for further information to the FAQ to section 17-6.

IBIs of blocked

beams off.

Amber LED is on to indicate

in Fixed Blanking mode.

SWA

SWB

IBIs of blocked

beams on.

Amber LED is off to indicate

in Fixed Blanking is disabled.

SWA

SWB

IBIs of blocked

beams on.

The amber LED and IBIs quit flashing

to indicate program switch is disabled.

The yellow LED turns on to indicate the

Start button is active.

off

SWA

SWB

F39-TGR-CVL-B-2-R Datasheet(PDF) 30 Page - Omron Electronics LLC

F39-TGR-CVL-B-2-R Datasheet(HTML) 30 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98

Datasheet Download

Link URL