7549 datasheet(36/73 Pages) RENESAS

36 / 73 page

Rev.2.00

Mar 05, 2007

Page 36 of 70

REJ03B0202-0200

7549 Group

PRELIMINARY

Notice: This is not a final specification.

Some parametric limits are subject to change.

Fig 46. Structure of serial I/O1-related registers

Transmit buffer empty flag (TBE)

0: Buffer full

1: Buffer empty

Receive buffer full flag (RBF)

0: Buffer empty

1: Buffer full

Transmit shift completion flag (TSC)

0: Transmit shift inprogress

1: Transmit shift completed

Overrun error flag (OE)

0: No error

1: Overrun error

Parity error flag (PE)

0: No error

1: Parity error

Framing error flag (FE)

0: No error

1: Framing error

Summing error flag (SE)

0: (OE) U (PE) U (FE)=0

1: (OE) U (PE) U (FE)=1

Not used (returns “1” when read)

UART control register

(UARTCON: address 001B16, initial value: E016)

Character length selection bit (CHAS)

0: 8 bits

1: 7 bits

Parity enable bit (PARE)

0: Parity checking disabled

1: Parity checking enabled

Parity selection bit (PARS)

0: Even parity

1: Odd parity

Stop bit length selection bit (STPS)

0: 1 stop bit

1: 2 stop bits

P05/TXD P-channel output disable bit (POFF)

0: CMOS output (in output mode)

1: N-channel open drain output (in output mode)

Not used (return “1” when read)

BRG count source selection bit (CSS)

φSOURCE

φSOURCE/4

Serial I/O synchronous clock selection bit (SCS)

0: BRG output divided by 4 when clock synchronous

serial I/O is selected, BRG output divided by 16

when UART is selected.

1: External clock input when clock synchronous serial

I/O is selected, external clock input divided by 16

when UART is selected.

SRDY output enable bit (SRDY)

0: P07 pin operates as ordinary I/O pin

1: P07 pin operates as SRDY output pin

Transmit interrupt source selection bit (TIC)

0: Interrupt when transmit buffer has emptied

1: Interrupt when transmit shift operation is completed

Transmit enable bit (TE)

0: Transmit disabled

1: Transmit enabled

Receive enable bit (RE)

0: Receive disabled

1: Receive enabled

Serial I/O mode selection bit (SIOM)

0: Clock asynchronous (UART) serial I/O

1: Clock synchronous serial I/O

Serial I/O enable bit (SIOE)

0: Serial I/O disabled

(pins P04 to P07 operate as ordinary I/O pins)

1: Serial I/O enabled

(pins P04 to P07 operate as serial I/O pins)

Serial I/O control register

(SIOCON: address 001A16, initial value: 0016)

Serial I/O status register

(SIOSTS: address 001916, initial value: 8016)

7549 Datasheet(PDF) 36 Page - Renesas Technology Corp

7549 Datasheet(HTML) 36 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

Datasheet Download

Link URL