| Electronic Components Datasheet Search |
|
PIC18F258-E/LSQTP Datasheet(PDF) 243 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
PIC18F258-E/LSQTP Datasheet(HTML) 243 Page - Microchip Technology |
|
243 / 402 page ![]() © 2006 Microchip Technology Inc. DS41159E-page 241 PIC18FXX8 20.0 COMPATIBLE 10-BIT ANALOG- TO-DIGITAL CONVERTER (A/D) MODULE The Analog-to-Digital (A/D) Converter module has five inputs for the PIC18F2X8 devices and eight for the PIC18F4X8 devices. This module has the ADCON0 and ADCON1 register definitions that are compatible with the PICmicro® mid-range A/D module. The A/D allows conversion of an analog input signal to a corresponding 10-bit digital number. The A/D module has four registers. These registers are: • A/D Result High Register (ADRESH) • A/D Result Low Register (ADRESL) • A/D Control Register 0 (ADCON0) • A/D Control Register 1 (ADCON1) The ADCON0 register, shown in Register 20-1, controls the operation of the A/D module. The ADCON1 register, shown in Register 20-2, configures the functions of the port pins. REGISTER 20-1: ADCON0: A/D CONTROL REGISTER 0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 R/W-0 U-0 R/W-0 ADCS1 ADCS0 CHS2 CHS1 CHS0 GO/DONE —ADON bit 7 bit 0 bit 7-6 ADCS1:ADCS0: A/D Conversion Clock Select bits (ADCON0 bits in bold) bit 5-3 CHS2:CHS0: Analog Channel Select bits 000 = Channel 0 (AN0) 001 = Channel 1 (AN1) 010 = Channel 2 (AN2) 011 = Channel 3 (AN3) 100 = Channel 4 (AN4) 101 = Channel 5 (AN5)(1) 110 = Channel 6 (AN6)(1) 111 = Channel 7 (AN7)(1) Note 1: These channels are unimplemented on PIC18F2X8 (28-pin) devices. Do not select any unimplemented channel. bit 2 GO/DONE: A/D Conversion Status bit When ADON = 1: 1 = A/D conversion in progress (setting this bit starts the A/D conversion which is automatically cleared by hardware when the A/D conversion is complete) 0 = A/D conversion not in progress bit 1 Unimplemented: Read as ‘0’ bit 0 ADON: A/D On bit 1 = A/D converter module is powered up 0 = A/D converter module is shut-off and consumes no operating current Legend: R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’ -n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown ADCON1 <ADCS2> ADCON0 <ADCS1:ADCS0> Clock Conversion 0 00 FOSC/2 0 01 FOSC/8 0 10 FOSC/32 0 11 FRC (clock derived from the internal A/D RC oscillator) 1 00 FOSC/4 1 01 FOSC/16 1 10 FOSC/64 1 11 FRC (clock derived from the internal A/D RC oscillator) |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |