TVP5146M2IPFPR datasheet(9/109 Pages) TI2

9 / 109 page

TVP5146M2

www.ti.com

SLES141H

– JULY 2005 – REVISED FEBRUARY 2012

NTSC/PAL/SECAM 4

×10-Bit Digital Video Decoder

With Macrovision

™ Detection, YPbPr Inputs, 5-Line Comb Filter,

and SCART Support

Check for Samples: TVP5146M2

Introduction

1.1

Features

1234

– Patented Architecture for Locking to Weak,

• Four 30-MSPS 11-Bit A/D Channels With

Noisy, or Unstable Signals

Programmable Gain Control

– Single 14.31818-MHz Reference Crystal for

• Supports NTSC (J, M, 4.43), PAL (B, D, G, H, I,

All Standards

M, N, Nc, 60), SECAM (B, D, G, K, K1, L), CVBS,

and S-Video

– Line-Locked Internal Pixel Sampling Clock

Generation With Horizontal and Vertical Lock

• Supports Analog SD YPbPr Component and

Signal Outputs

SCART (RGB/YPbPr + CVBS) Video Formats

With Embedded Sync

– Genlock Output RTC Format for Downstream

Video Encoder Synchronization

• Ten Analog Video Input Terminals for

Multisource Connection

• Certified Macrovision™ Copy Protection

Detection

• User-Programmable Video Output Formats

• Available in Commercial (0°C to 70°C) and

– 10-Bit ITU-R BT.656 4:2:2 YCbCr With

Industrial (

−40°C to 85°C) Temperature Ranges

Embedded Syncs

• VBI Data Processor

– 10-Bit 4:2:2 YCbCr With Separate Syncs

– Teletext (NABTS, WST)

– 20-Bit 4:2:2 YCbCr With Separate Syncs

– CC and Extended Data Service (EDS)

– 2× Sampled Raw VBI Data in Active Video

During Vertical Blanking Period

– Wide Screen Signaling (WSS)

– Sliced VBI Data During Vertical Blanking

– Copy Generation Management System

Period or Active Video Period (Full-Field

(CGMS)

Mode)

– Video Program System (VPS/PDC)

• HSYNC/VSYNC Outputs With Programmable

– Vertical Interval Time Code (VITC)

Position, Polarity, Width, and Field ID (FID)

– Gemstar™ 1×/2× Mode

Output

– V-Chip Decoding

• Component Video Processing

– Register Readback of CC, WSS (CGMS),

– Gain (Contrast) and Offset (Brightness)

VPS/PDC, VITC and Gemstar 1

×/2× Sliced

Adjustments

Data

– Automatic Component Video Detection

• I2C Host Port Interface

(525/625)

• Reduced Power Consumption: 1.8-V Digital

– Color Space Conversion from RGB to YCbCr

Core, 3.3-V Digital I/O, and 1.8-V Analog Core

• Composite and S-Video Processing

With Power-Save and Power-Down Modes

– Adaptive 2-D 5-Line Adaptive Comb Filter for

• 80-Terminal TQFP PowerPAD™ Package

Composite Video Inputs; Chroma-Trap

• RGB Sync on Green Not Currently Supported,

Available

All References to "RGB" in This Data Manual

– Automatic Video Standard Detection

Imply "SCART RGB"

(NTSC/PAL/SECAM) and Switching

– Luma Peaking With Programmable Gain

– Patented Chroma Transient Improvement

(CTI) Circuit

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PowerPAD is a trademark of Texas Instruments.

Gemstar is a trademark of Gemstar-TV Guide Intermational.

Macrovision is a trademark of Macrovision Corporation.

PRODUCTION DATA information is current as of publication date. Products conform to

specifications per the terms of the Texas Instruments standard warranty. Production

processing does not necessarily include testing of all parameters.

TVP5146M2IPFPR Datasheet(PDF) 9 Page - Texas Instruments

TVP5146M2IPFPR Datasheet(HTML) 9 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL