STM32L151VD datasheet(80/154 Pages) STMICROELECTRONICS

80 / 154 page

Electrical characteristics

STM32L151xD STM32L152xD

80/154

DocID022027 Rev 11

Low-speed external user clock generated from an external source

The characteristics given in the following table result from tests performed using a low-

speed external clock source, and under the conditions summarized in Table 13.

Figure 15. Low-speed external clock source AC timing diagram

High-speed external clock generated from a crystal/ceramic resonator

The high-speed external (HSE) clock can be supplied with a 1 to 24 MHz crystal/ceramic

resonator oscillator. All the information given in this paragraph are based on

characterization results obtained with typical external components specified in Table 28. In

the application, the resonator and the load capacitors have to be placed as close as

possible to the oscillator pins in order to minimize output distortion and startup stabilization

time. Refer to the crystal resonator manufacturer for more details on the resonator

characteristics (frequency, package, accuracy).

Table 27. Low-speed external user clock characteristics(1)

1. Guaranteed by design.

Symbol

Parameter

Conditions

Min

Typ

Max

Unit

fLSE_ext

User external clock source

frequency

32.768

1000

kHz

VLSEH

OSC32_IN input pin high level

voltage

0.7VDD

-VDD

VLSEL

OSC32_IN input pin low level

voltage

VSS

-0.3VDD

tw(LSEH)

tw(LSEL)

OSC32_IN high or low time

465

tr(LSE)

tf(LSE)

OSC32_IN rise or fall time

CIN(LSE) OSC32_IN input capacitance

0.6

STM32L151VD Datasheet(PDF) 80 Page - STMicroelectronics

STM32L151VD Datasheet(HTML) 80 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL