| Electronic Components Datasheet Search |
|
CS-LD03 Datasheet(PDF) 4 Page - Wavelength Electronics, Inc. |
|
|
|||||||||||||||||||||||||||||
CS-LD03 Datasheet(HTML) 4 Page - Wavelength Electronics, Inc. |
|
4 / 5 page ![]() Case Study CS-LD03 Rev. A Page 4 © 2021 • Sales & Technical Support: (406) 587-4910 • email: sales@teamWavelength.com • web: www.teamWavelength.com "Based on the fit residuals, no differences between the two methods can be observed, which demonstrates the applicability of the all-optical CRDS method for detection of trace gases using a MIR QCL."1 Optical interruption of the MIR QCL allows for lower cost using a low-power NIR diode laser. It also reduces the bandwidth needed from the QCL driver (further reducing cost) and provides a fast interruption of the laser coupling into the cavity. The researchers also hypothesize that "acquiring ring-down events rapidly by locking the laser to the cavity modes could be achieved with the optical interruption due to faster recovery after each ring-down event."1 Clean ring-down events can be generated and accurately repeated. A less complex design of the electronics can lead to very comparable results and expand the range of applications. WAVELENGTH'S ROLE Stability is crucial for proper operation and repeatable results for multiple lasers in the optical interruption for CRDS. Low noise from the laser diode ensured that the linewidth of the QCL was not affected. Wavelength Electronics' LDD200 ( Figure 7) provides a current limit of 200 mA with multiple features and benefits. In this application it drove the current of the laser diode with noise as low as 5 µA (RMS) and adjustable current limit. This low-cost and compact laser driver provided the laser stability necessary for injection current into the QCL. Figure 7. LDD200 Laser Diode Driver The LDD200 laser driver operates from a single power supply between 5 and 12 V. The limit current trimpot can be adjusted to protect the laser diode from exceeding its maximum current rating even when modulating the laser diode. An evaluation board is available to speed implementation of the LDD200 in the appropriate application. Wavelength's QCL1000 OEM driver ( Figure 8) provides a current limit of 1 A with low noise (0.7 µA) needed for spectroscopy applications. It has modulation bandwidth capabilities of up to 3 MHz, average current noise density of 2 nA/√Hz, and current limit controls on-board. The QCL driver minimizes linewidth, drift, and jitter of the laser system. Figure 8. QCL1000 OEM QCL Driver The patented QCL driver enables rapid integration and dual supply operation. Standard compliance voltage to the laser is 16 V, and other features (setpoint, limit, delay, and ramp) protect the laser. |
|
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |