QCL-LAB datasheet(24/24 Pages) WAVELENGTH

24 / 24 page

WARRANTY & CERTIFICATION

CERTIFICATION

Wavelength Electronics, Inc. (Wavelength) certifies that this product

met its published specifications at the time of shipment. Wavelength

further certifies that its calibration measurements are traceable to

the United States National Institute of Standards and Technology, to

the extent allowed by that organization’s calibration facilities, and to

the calibration facilities of other International Standards Organization

members.

WARRANTY

This Wavelength product is warranted against defects in materials

and workmanship for a period of one (1) year from date of shipment.

During the warranty period, Wavelength will, at its option, either

repair or replace products which prove to be defective. Warranty is

void if label is removed from back panel.

WARRANTY SERVICE

For warranty service or repair, this product must be returned to the

factory. An RMA is required for products returned to Wavelength

for warranty service. The Buyer shall prepay shipping charges to

Wavelength and Wavelength shall pay shipping charges to return

the product to the Buyer upon determination of defective materials

or workmanship. However, the Buyer shall pay all shipping charges,

duties, and taxes for products returned to Wavelength from another

country.

LIMITATIONS OF WARRANTY

The warranty shall not apply to defects resulting from improper use or

misuse of the product or operation outside published specifications.

Warranty for the QCL instrument is invalid if the instrument cover

has been removed for any reason. No other warranty is expressed

or implied. Wavelength specifically disclaims the implied warranties

of merchantability and fitness for a particular purpose.

EXCLUSIVE REMEDIES

The remedies provided herein are the Buyer’s sole and exclusive

remedies. Wavelength shall not be liable for any direct, indirect,

special, incidental, or consequential damages, whether based on

contract, tort, or any other legal theory.

REVERSE ENGINEERING PROHIBITED

Buyer, End-User, or Third-Party Reseller are expressly prohibited

from reverse engineering, decompiling, or disassembling this

product.

NOTICE

The information contained in this document is subject to change

without notice. Wavelength will not be liable for errors contained

herein or for incidental or consequential damages in connection with

the furnishing, performance, or use of this material. No part of this

document may be translated to another language without the prior

written consent of Wavelength.

SAFETY

There are no user-serviceable parts inside this product. Return the

product to Wavelength Electronics for service and

repair to ensure that safety features are maintained.

LIFE SUPPORT POLICY

This important safety information applies to all Wavelength electrical

and electronic products and accessories:

As a general policy, Wavelength Electronics, Inc. does not

recommend the use of any of its products in life support applications

where the failure or malfunction of the Wavelength product can be

reasonably expected to cause failure of the life support device or

to significantly affect its safety or effectiveness. Wavelength will

not knowingly sell its products for use in such applications unless it

receives written assurances satisfactory to Wavelength that the risks

of injury or damage have been minimized, the customer assumes all

such risks, and there is no product liability for Wavelength. Examples

of devices considered to be life support devices are:

neonatal oxygen analyzers, nerve stimulators (for

any use), auto-transfusion devices, blood pumps,

defibrillators, arrhythmia detectors and alarms,

pacemakers, hemodialysis systems, peritoneal dialysis

systems, ventilators of all types, and infusion pumps as

well as other devices designated as “critical” by the FDA.

The above are representative examples only and are not

intended to be conclusive or exclusive of any

other life support device.

CALIBRATION INTERVAL

The customer is responsible for determining calibration intervals;

however, Wavelength Electronics recommends a calibration interval

of two (2) years, beginning from the original date of manufacture. The

instrument’s calibration can be influenced by temperature, humidity,

vibration and shock, as well as general wear over time. Extending

the calibration interval can lead to operation outside of specifications

and is not recommended.

TECHNICAL SUPPORT & CONTACT

INFORMATION

REVISION HISTORY

Document Number:

QCL1000-LA400

REVISION

DATE

NOTES

September 2019

Updated Analog Input settings

December 2023

Added Calibration Interval

WAVELE

nGTH

ELECTRONICS

51 Evergreen Drive

Bozeman, Montana 59771

406-587-4910 (tel)

406-587-4911 (fax)

Sales & Tech Support

sales@teamWavelength.com

techsupport@teamWavelength.com

QCL-LAB Datasheet(PDF) 24 Page - Wavelength Electronics, Inc.

QCL-LAB Datasheet(HTML) 24 Page - Wavelength Electronics, Inc.

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Datasheet Download

Link URL