H8SLASH3028F datasheet(378/923 Pages) RENESAS

Part #	H8/3028F

Description	Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series

PDF	923 Pages

Scroll/Zoom	100%

Manufacturer	RENESAS [Renesas Technology Corp]

Direct Link	http://www.renesas.com

Logo

378 / 923 page

Rev. 2.00, 09/03, page 348 of 890

• Input capture signal timing

Input capture on the rising edge, falling edge, or both edges can be selected by settings in

TIOR. Figure 9.23 shows the timing when the rising edge is selected. The pulse width of the

input capture signal must be at least 1.5 system clocks for single-edge capture, and 2.5 system

clocks for capture of both edges.

Input-capture input

Input capture signal

16TCNT

GRA, GRB

Figure 9.23 Input Capture Signal Timing

9.4.3

Synchronization

The synchronization function enables two or more timer counters to be synchronized by writing

the same data to them simultaneously (synchronous preset). With appropriate 16TCR settings, two

or more timer counters can also be cleared simultaneously (synchronous clear). Synchronization

enables additional general registers to be associated with a single time base. Synchronization can

be selected for all channels (0 to 2).

Sample Setup Procedure for Synchronization: Figure 9.24 shows a sample procedure for

setting up synchronization.

H8/3028F Datasheet(PDF) 378 Page - Renesas Technology Corp