PIC16F722-ESLASHML datasheet(84/302 Pages) MICROCHIP

84 / 302 page

PIC16F72X/PIC16LF72X

DS41341E-page 84

6.6

PORTE and TRISE Registers

PORTE(1) is a 4-bit wide, bidirectional port. The

corresponding data direction register is TRISE. Setting a

TRISE bit (= 1) will make the corresponding PORTE pin

an input (i.e., put the corresponding output driver in a

High-Impedance mode). Clearing a TRISE bit (= 0) will

make the corresponding PORTE pin an output (i.e.,

enable the output driver and put the contents of the

output latch on the selected pin). The exception is RE3,

which is input only and its TRIS bit will always read as

‘1’. Example 6-5 shows how to initialize PORTE.

Reading the PORTE register (Register 6-15) reads the

status of the pins, whereas writing to it will write to the

PORT latch. All write operations are read-modify-write

operations. Therefore, a write to a port implies that the

port pins are read, this value is modified and then

written to the PORT data latch. RE3 reads ‘0’ when

MCLRE = 1.

The TRISE register (Register 6-16) controls the PORTE

pin output drivers, even when they are being used as

analog inputs. The user should ensure the bits in the

TRISE register are maintained set when using them as

analog inputs. I/O pins configured as analog input always

read ‘0’.

EXAMPLE 6-5:

INITIALIZING PORTE

Note 1: RE<2:0>

and

TRISE<2:0>

are

not

implemented on the PIC16F722/723/726/

PIC16LF722/723/726. Read as ‘0’.

Note:

The ANSELE register must be initialized to

configure an analog channel as a digital

input. Pins configured as analog inputs will

read ‘0’.

BANKSEL PORTE

;

CLRF

PORTE

;Init PORTE

BANKSEL ANSELE

;

CLRF

ANSELE

;digital I/O

BANKSEL TRISE

;

MOVLW

B‘00001100’

;Set RE<2> as an input

MOVWF

TRISE

;and set RE<1:0>

;as outputs

PIC16F722-E/ML Datasheet(PDF) 84 Page - Microchip Technology

PIC16F722-E/ML Datasheet(HTML) 84 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL