| Electronic Components Datasheet Search |
|
DM330023-2 Datasheet(PDF) 33 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
DM330023-2 Datasheet(HTML) 33 Page - Microchip Technology |
|
33 / 64 page ![]() dsPICDEM™ MCHV DEVELOPMENT SYSTEM USER’S GUIDE 2009 Microchip Technology Inc. DS70605A-page 27 Chapter 3. Running the Demonstration This chapter describes the demonstration software that is preloaded on the dsPIC33F device. This application software, which is based on application note AN984, demon- strates how to use the dsPICDEM™ MCHV Development System for controlling an AC induction motor (ACIM). For more information on this application note please refer to the following Microchip web page: www.microchip.com/dscmotor To run the demo, follow these basic steps: 1. Connect the system by connecting the AC Induction Motor to the motor connector. 2. Power up the dsPICDEM™ MCHV Development System by connecting the power cord to the mains. To verify that the unit is powered, make sure that the LEDs D6, D13, D17, and D18 are ON. The very first time you connect the system to any host PC, you should briefly see a popup balloon in the system tray (lower right of desktop) that states (1) new hardware has been found, (2) drivers are being installed, and (3) new hardware is ready for use. If you do not see these messages and the Starter Kit does not work, try reconnecting the USB. If this does not work, see Section 2.4.7 “Troubleshooting”. 3. When powered up, the application will turn on the LEDs PWM1L1, PWM1L2 and PWM1L3. To use the application, follow these steps: a) Make sure the PWM OUTPUT shunt jumper is installed. b) To start/stop the motor, press the switch labeled “PUSHBUTTON”. c) To increase the motor speed, rotate the potentiometer labeled “POT” clockwise. To reduce the speed, rotate the potentiometer counterclockwise. Note: Before making any connection, verify that the system is not powered and it is fully discharged. The system is completed discharged when the red LED D13 is off. Note: The unit is designed to be connected to the AC mains supply via a standard non-locking plug. As the unit has no mains switch, this plug constitutes the means of disconnection from the supply. Therefore, the user must have unobstructed access to this plug during operation. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |