CD00237391 datasheet(172/177 Pages) STMICROELECTRONICS

172 / 177 page

Revision history

STM32F20xxx

172/177

Doc ID 15818 Rev 9

14-Jun-2011

Added SDIO in Table 2: STM32F205xx features and peripheral counts.

Updated VIN for 5V tolerant pins in Table 9: Voltage characteristics.

Updated jitter parameters description in Table 32: Main PLL

characteristics.

Remove jitter values for system clock in Table 33: PLLI2S (audio PLL)

characteristics.

Updated Table 40: EMI characteristics.

Update Note 2 in Table 50: I2C characteristics.

Updated Avg_Slope typical value and TS_temp minimum value in

Table 67: TS characteristics.

Updated TS_vbat minimum value in Table 68: VBAT monitoring

characteristics.

Updated TS_vrefint mimimum value in Table 69: Embedded internal

reference voltage.

Added Software option in Section 7: Part numbering.

In Table 93: Main applications versus package for STM32F2xxx

microcontrollers, renamed USB1 and USB2, USB OTG FS and USB

OTG HS, respectively; and removed USB OTG FS and camera

interface for 64-pin package; added USB OTG HS on 64-pin package;

added Note 1 and Note 2.

20-Dec-2011

Updated SDIO register addresses in Figure 14: Memory map.

Updated Figure 3: Compatible board design between STM32F10xx

and STM32F2xx for LQFP144 package, Figure 2: Compatible board

design between STM32F10xx and STM32F2xx for LQFP100 package,

Figure 1: Compatible board design between STM32F10xx and

STM32F2xx for LQFP64 package, and added Figure 4: Compatible

board design between STM32F10xx and STM32F2xx for LQFP176

package.

Updated Section 2.2.3: Memory protection unit.

Updated Section 2.2.6: Embedded SRAM.

Updated Section 2.2.28: Universal serial bus on-the-go full-speed

(OTG_FS) to remove external FS OTG PHY support.

In Table 6: STM32F20x pin and ball definitions: changed SPI2_MCK

and SPI3_MCK to I2S2_MCK and I2S3_MCK, respectively. Added

ETH _RMII_TX_EN atlternate function to PG11. Added EVENTOUT in

the list of alternate functions for I/O pin/balls. Removed

OTG_FS_SDA, OTG_FS_SCL and OTG_FS_INTN alternate

functions.

In Table 8: Alternate function mapping: changed I2S3_SCK to

I2S3_MCK for PC7/AF6, added FSMC_NCE3 for PG9, FSMC_NE3

for PG10, and FSMC_NCE2 for PD7. Removed OTG_FS_SDA,

OTG_FS_SCL and OTG_FS_INTN alternate functions. Changed

I2S3_SCK into I2S3_MCK for PC7/AF6. Updated peripherals

corresponding to AF12.

Removed CEXT and ESR from Table 12: General operating

conditions.

Table 94.

Document revision history (continued)

Date

Revision

Changes

CD00237391 Datasheet(PDF) 172 Page - STMicroelectronics

CD00237391 Datasheet(HTML) 172 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL