PIC17C752-08SLASHP datasheet(229/320 Pages) MICROCHIP

229 / 320 page

Preliminary

DS30264A-page 229

PIC17C75X

DC CHARACTERISTICS

Standard Operating Conditions (unless otherwise stated)

Operating temperature

-40˚C

≤ TA ≤ +40˚C

Operating voltage VDD range as described in Section 20.1

Param.

No.

Sym

Characteristic

Min

Typ†

Max Units

Conditions

Internal Program Memory

Programming Specs (Note 4)

D110

D111

D112

D113

D114

VPP

VDDP

IPP

IDDP

TPROG

Voltage on MCLR/VPP pin

Supply voltage during

programming

Current into MCLR/VPP pin

Supply current during

programming

Programming pulse width

12.75

4.75

–

100

–

5.0

25 ‡

–

13.25

5.25

50 ‡

30 ‡

1000

µs

Note 5

Terminated via inter-

nal/external interrupt or a

reset

These parameters are characterized but not tested.

†

Data in “Typ” column is at 5V, 25

°C unless otherwise stated. These parameters are for design guidance only

and are not tested.

‡

These parameters are for design guidance only and are not tested, nor characterized.

Note 1: In RC oscillator conﬁguration, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the

PIC17CXX devices be driven with external clock in RC mode.

2: The leakage current on the MCLR pin is strongly dependent on the applied voltage level. The speciﬁed levels

represent normal operating conditions. Higher leakage current may be measured at different input voltages.

3: Negative current is deﬁned as coming out of the pin.

4: These speciﬁcations are for the programming of the on-chip program memory EPROM through the use of the

table write instructions. The complete programming speciﬁcations can be found in: PIC17CXX Programming

Speciﬁcations (Literature number DS30139).

5: The MCLR/VPP pin may be kept in this range at times other than programming, but is not recommended.

6: For TTL buffers, the better of the two speciﬁcations may be used.

Note 1: When using the Table Write for internal programming, the device temperature must be less than 40˚C.

Note 2: For In-circuit Serial Programming (ISP), refer to the device programming speciﬁcation.

PIC17C752-08/P Datasheet(PDF) 229 Page - Microchip Technology

PIC17C752-08/P Datasheet(HTML) 229 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL