MCP39F511 datasheet(37/62 Pages) MICROCHIP

37 / 62 page

 2015 Microchip Technology Inc.

DS20005393B-page 37

MCP39F511

6.6

Range Register

The Range register is a 32-bit register that contains the

number of right-bit shifts for the following outputs,

divided into separate bytes defined below:

• RMS Current

•RMS Voltage

• Power (Active, Reactive, Apparent)

Note that the Power Range Byte operates across both

the active and reactive output registers and sets the

same scale.

The purpose of this register is two-fold: the number of

right-bit shifting (division by 2RANGE) must be:

• high enough to prevent overflow in the output reg-

ister,

• low enough to allow for the desired output resolu-

tion.

It is the user’s responsibility to set this register correctly

to ensure proper output operation for a given meter

design.

For further information and example usage, see

Section 9.3 “Single-Point Gain Calibrations at

Unity Power Factor”

RANGE REGISTER

U-0

—

bit 31

bit 24

R/W-0

R/W-1

R/W-0

R/W-1

POWER<7:0>

bit 23

bit 16

R/W-0

R/W-1

R/W-0

CURRENT<7:0>

bit 15

bit 8

R/W-0

R/W-1

R/W-0

R/W-1

R/W-0

VOLTAGE<7:0>

bit 7

bit 0

Legend:

R = Readable bit

W = Writable bit

U = Unimplemented bit, read as ‘0’

-n = Value at POR

‘1’ = Bit is set

‘0’ = Bit is cleared

x = Bit is unknown

bit 31-24

Unimplemented:

Read as ‘0’

bit 23-16

POWER<7:0>:

Sets the number of right-bit shifts for the Active and Reactive Power output registers

bit 15-8

CURRENT<7:0>:

Sets the number of right-bit shifts for the Current RMS output register

bit 7-0

VOLTAGE<7:0>:

Sets the number of right-bit shifts for the Voltage RMS output register

MCP39F511 Datasheet(PDF) 37 Page - Microchip Technology

MCP39F511 Datasheet(HTML) 37 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62

Datasheet Download

Link URL