| Electronic Components Datasheet Search |
|
AT45DB641E Datasheet(PDF) 40 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
AT45DB641E Datasheet(HTML) 40 Page - Renesas Technology Corp |
|
40 / 78 page ![]() DS-AT45DB641E-027 Rev. O Page 40 6/30/23 © 2023 Renesas Electronics AT45DB641E Datasheet 10.4 Status Register Read The 2-byte Status Register can be used to determine the device's ready/busy status, page size, a Main Memory Page to Buffer Compare operation result, the sector protection status, Freeze Sector Lockdown status, erase/program error status, Program/Erase Suspend status, and the device density. The Status Register can be read at any time, including during an internally self-timed program or erase operation. To read the Status Register, the CS pin must first be asserted and then the opcode D7h must be clocked into the device. After the opcode has been clocked in, the device begins outputting Status Register data on the SO pin during every subsequent clock cycle. After the second byte of the Status Register has been clocked out, the sequence repeats itself, starting again with the first byte of the Status Register, as long as the CS pin remains asserted and the clock pin is being pulsed. The data in the Status Register are constantly being updated, consequently, each repeating sequence can output new data. The RDY/BUSY status is available for both bytes of the Status Register and is updated for each byte. Deasserting the CS pin terminates the Status Register Read operation and put the SO pin into a high-impedance state. The CS pin can be deasserted at any time and does not require that a full byte of data be read. 1. R = Readable only. Table 20. Status Register Format – Byte 1 Bit Name Type[1] Description 7 RDY/BUSY Ready/Busy Status R 0 Device is busy with an internal operation. 1 Device is ready. 6 COMP Compare Result R 0 Main memory page data match buffer data. 1 Main memory page data do not match buffer data. 5:2 DENSITY Density Code R 1111 64-Mbit 1 PROTECT Sector Protection Status R 0 Sector protection is disabled. 1 Sector protection is enabled. 0 PAGE SIZE Page Size Configuration R 0 Device is configured for standard DataFlash page size (264 bytes). 1 Device is configured for “power of 2” binary page size (256 bytes). |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |