H8SLASH3028F datasheet(352/923 Pages) RENESAS

352 / 923 page

Rev. 2.00, 09/03, page 322 of 890

Bit 5—Input Capture/Compare Match Interrupt Enable A1 (IMIEA1): Enables or disables

the interrupt requested by the IMFA1 flag when IMFA1 is set to 1.

Bit 5

IMIEA1

Description

IMIA1 interrupt requested by IMFA1 flag is disabled

(Initial value)

IMIA1 interrupt requested by IMFA1 flag is enabled

Bit 4—Input Capture/Compare Match Interrupt Enable A0 (IMIEA0): Enables or disables

the interrupt requested by the IMFA0 flag when IMFA0 is set to 1.

Bit 4

IMIEA0

Description

IMIA0 interrupt requested by IMFA0 flag is disabled

(Initial value)

IMIA0 interrupt requested by IMFA0 flag is enabled

Bit 3—Reserved: This bit cannot be modified and is always read as 1.

Bit 2—Input Capture/Compare Match Flag A2 (IMFA2): This status flag indicates GRA2

compare match or input capture events.

Bit 2

IMFA2

Description

[Clearing conditions]

(Initial value)

• Read IMFA2 flag when IMFA2 =1, then write 0 in IMFA2 flag

• DMAC is activated by an IMIA2 interrupt

[Setting conditions]

• 16TCNT2 = GRA2 when GRA2 functions as an output compare register

• 16TCNT2 value is transferred to GRA2 by an input capture signal when GRA2

functions as an input capture register

H8/3028F Datasheet(PDF) 352 Page - Renesas Technology Corp