MPC5673F datasheet(55/132 Pages) FREESCALE

55 / 132 page

Electrical Characteristics

MPC5674F Microcontroller Data Sheet, Rev. 6

Freescale Semiconductor

Figure 27. D_CLKOUT Timing

D_ALE Pulse Width

tAPW

6.5

—

The timing is for Asynchronous

external memory system.

D_ALE Negated to Address Invalid

tAAI

2.0/1.0 5

—

The timing is for Asynchronous

external memory system.

ALE is measured at 50% of VDDE.

1 EBI timing specified at V

DD = 1.08 V to 1.32 V, VDDE = 3.0 V to 3.6 V, VDD33 and VDDSYN = 3.0 V to 3.6 V, TA =TL to TH, and

CL = 30 pF with DSC = 0b10.

2 Speed is the nominal maximum frequency. Max speed is the maximum speed allowed including frequency modulation (FM).

270 MHz parts allow for 264 MHz system clock + 2% FM.

3 Depending on the internal bus speed, set the SIU_ECCR[EBDF] bits correctly not to exceed maximum external bus frequency.

The maximum external bus frequency is 66 MHz.

4 Refer to Fast pad timing in Table 31 and Table 32.

5 ALE hold time spec is temperature dependant. 1.0ns spec applies for temperature range -40 to 0 C. 2.0ns spec applies to

temperatures > 0 C. This spec has no dependency on SIU_ECCR[EBTS] bit.

Table 36. Bus Operation Timing 1 (continued)

Spec

Characteristic

Symbol

66 MHz (Ext. Bus Freq)2 3

Unit

Notes

Min

Max

D_CLKOUT

VDDE / 2

VOL_F

VOH_F

MPC5673F Datasheet(PDF) 55 Page - Freescale Semiconductor, Inc