STM32G47PBY3XXX datasheet(128/229 Pages) STMICROELECTRONICS

128 / 229 page

Electrical characteristics

STM32G473xB STM32G473xC STM32G473xE

128/229

DS12712 Rev 3

In the user application, the number of I/O pins which can drive current must be limited to

respect the absolute maximum rating specified in Section 5.2:

•

The sum of the currents sourced by all the I/Os on VDD, plus the maximum

consumption of the MCU sourced on VDD, cannot exceed the absolute maximum rating

ΣIVDD (see Table 14: Voltage characteristics).

•

The sum of the currents sunk by all the I/Os on VSS, plus the maximum consumption of

the MCU sunk on VSS, cannot exceed the absolute maximum rating ΣIVSS (see

Table 14: Voltage characteristics).

Output voltage levels

Unless otherwise specified, the parameters given in the table below are derived from tests

performed under the ambient temperature and supply voltage conditions summarized in

Table 17: General operating conditions. All I/Os are CMOS- and TTL-compliant (FT OR TT

unless otherwise specified).

Input/output AC characteristics

The definition and values of input/output AC characteristics are given in Figure 26 and

Table 56, respectively.

Unless otherwise specified, the parameters given are derived from tests performed under

the ambient temperature and supply voltage conditions summarized in Table 17: General

operating conditions.

Table 55. Output voltage characteristics(1)(2)

Symbol

Parameter

Conditions

Min

Max

Unit

VOL(3) Output low level voltage for an I/O pin CMOS port

|IIO| = 2 mA for FT_c

I/Os = 8 mA for other I/Os VDD

≥ 2.7 V

-0.4

VOH(3) Output high level voltage for an I/O pin

VDD-0.4

VOL(3) Output low level voltage for an I/O pin TTL port

|IIO| = 2 mA for FT_c

I/Os = 8 mA for other I/Os

VDD ≥ 2.7 V

-0.4

VOH(3) Output high level voltage for an I/O pin

2.4

VOL(3) Output low level voltage for an I/O pin All I/Os except FT_c

|IIO| = 20 mA

VDD ≥ 2.7 V

-1.3

VOH(3) Output high level voltage for an I/O pin

VDD-1.3

VOL(3) Output low level voltage for an I/O pin |IIO| = 1 mA for FT_c

I/Os = 4 mA for other I/Os

VDD ≥ 1.62 V

-0.4

VOH(3) Output high level voltage for an I/O pin

VDD-0.45

VOLFM+

(3)

Output low level voltage for an FT I/O

pin in FM+ mode (FT I/O with “f”

option)

|IIO| = 20 mA

VDD ≥ 2.7 V

-0.4

|IIO| = 10 mA

VDD ≥ 1.62 V

-0.4

1. The IIO current sourced or sunk by the device must always respect the absolute maximum rating specified in Table 14:

Voltage characteristics, and the sum of the currents sourced or sunk by all the I/Os (I/O ports and control pins) must always

respect the absolute maximum ratings ΣIIO.

2. TTL and CMOS outputs are compatible with JEDEC standards JESD36 and JESD52.

3. Guaranteed by design.

STM32G47PBY3XXX Datasheet(PDF) 128 Page - STMicroelectronics

STM32G47PBY3XXX Datasheet(HTML) 128 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL