PWR-2700-DC-R datasheet(66/80 Pages) ARISTA

66 / 80 page

1 Status LED

2 10G port LEDS

DCS-7500E-12CM-LC

The 12 x 100G MTP/MPO line card provides high density 100G using Arista Multi-speed Ports (MXP)

with embedded optics. The MXP ports use 100GBASE-SR10 (Short Range) transceivers and are fully

compatible with any standards compliant 100GBASE-SR10 ports. Each MXP port can be enabled in

single 100Gb, triple 40Gb or twelve 10Gb Ethernet mode for up to 12 – 100Gb, 36 – 40Gb and 144 –

10Gb Ethernet ports per line card. Since each of MXP ports come with integrated optics, no external

transceivers are required for this line card.

1 Status LED

2 MXP port LEDS

DCS-7500E-6C2-LC

The 6 x 100G CFP2 line card provides high performance 100G using industry standard CFP2 optics

that are hot pluggable. The CFP2 form factor is designed to allow for long haul optics with a size that

is approximately 50% smaller than the CFP optic. As a result CFP2 based line cards allow for up to

6 ports per line card, which increases overall system density. The CFP2 form factor allows 100GbE

optics to be installed and with the use of 10x10 and 2x40 mode a choice of 10/40/100GbE.

1 Status LED

2 CFP2 port LEDS

DCS-7500E-12CQ-LC

The 12 x 100G QSFP100 line card provides high density 100G using industry standard QSFP100

optics. The QSFP100 form factor is identical to the size of the 40G QSFP+ allowing for either 40GbE

or 100GbE optics to be installed, for a dual speed choice of 40/100GbE on all ports. With 12 ports of

PWR-2700-DC-R Datasheet(PDF) 66 Page - Arista Networks, Inc