E2EW Series

9

Ratings and Specifications

E2EW Series (Quadruple/Triple distance model)

E2EW-Q Series (Spatter-resistant Quadruple/Triple distance model)

DC 3-wire

Shielded

1. The response frequency is an average value. Factory setting: (timer function: ONOFF delay)

2. IO-Link is not supported for NC-type PNP outputs or all types of NPN outputs.

3. UL temperature rating is between 0 °C to 60 °C.

Type

Quadruple distance model

Triple distance model

Size

M12

M18

M30

M12

M18

M30

Item

Model E2EW-(Q)X712 E2EW-(Q)X1218 E2EW-(Q)X2230 E2EW-(Q)X612 E2EW-(Q)X1018 E2EW-(Q)X2030

Sensing distance

7 mm ±10%

12 mm ±10%

22 mm ±10%

6 mm ±10%

10 mm ±10%

20 mm ±10%

Setting distance

0 to 4.9 mm

0 to 8.4 mm

0 to 15.4 mm

0 to 4.2 mm

0 to 7.0 mm

0 to 14 mm

Differential travel

15% max. of sensing distance

Detectable object

Ferrous metals and non-ferrous metals (The sensing distance depends on the material of the sensing object. Refer to

Engineering Data on page 11.)

Standard sensing object

Iron,

21 × 21 × 1 mm

Iron,

36 × 36 × 1 mm

Iron,

66 × 66 × 1 mm

Iron,

18 × 18 × 1 mm

Iron,

30 × 30 × 1 mm

Iron,

60 × 60 × 1 mm

Response frequency 1

2 Hz

Power supply voltage

10 to 30 VDC (including 10% ripple (p-p)), Class 2

Current consumption

720 mW max. (Current consumption: 30 mA max. at power supply voltage of 24 V)

Output configuration

B Models: PNP open collector, C Models: NPN open collector

Operation mode

1-output models (B1, C1): NO (Normally open),

1-output models (B2, C2): NC (Normally closed),

2-output models (B3, C3): NO+NC (Normally open, Normally closed)

Control output

Load current

1-output models (B1,B2,C1,C2): 10 to 30 VDC, Class 2, 200 mA max.

2-output models (B3, C3): 10 to 30 VDC, Class 2, 100 mA max.

Residual voltage

1-output models (B1,B2,C1,C2): 2 V max. (Load current: 200 mA, Cable length: 2 m)

2-output models (B3, C3): 2 V max. (Load current: 100 mA, Cable length: 2 m)

Indicator

In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and communication indicator (green, not lit)

In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green,

blinking at 1 s intervals)

Protection circuits

Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection

Ambient temperature range

Operating: 0 to 85 °C, Storage: -15 to 85 °C (with no icing or condensation) 3

Ambient humidity range

Operating/Storage: 35% to 95% (with no condensation)

Temperature influence

±20% max. of sensing distance at 23 °C in the temperature range of 0 to 85 °C

Voltage influence

±1.5% max. of sensing distance at rated voltage in the rated voltage ±15% range

Insulation resistance

50 M min. (at 500 VDC) between current-carrying parts and case

Dielectric strength

1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case

Vibration resistance (destruction)

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance (destruction)

1,000 m/s2 10 times each in X, Y, and Z directions

Degree of protection

IEC 60529: IP67

Connection method

Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models (Standard cable length: 0.3 m),

M12 Connector Models

Weight

(packed state)

Pre-wired

Approx. 140 g

Approx. 165 g

Approx. 225 g

Approx. 140 g

Approx. 165 g

Approx. 225 g

M12 Pre-wired

Smartclick

Connector

Approx. 70 g

Approx. 100 g

Approx. 160 g

Approx. 70 g

Approx. 100 g

Approx. 160 g

M12 Connector

Approx. 60 g

Approx. 75 g

Approx. 135 g

Approx. 60 g

Approx. 75 g

Approx. 135 g

Materials

Case

E2EW-X: Stainless steel (SUS303), E2EW-QX: Fluororesin coating (Base material: (SUS303))

Sensing surface

E2EW-X: Stainless steel (SUS303), E2EW-QX: Fluororesin coating (Base material: (SUS303))

Sensing surface

(Thickness)

0.4 mm

0.4 mm

0.5 mm

0.4 mm

0.4 mm

0.5 mm

Clamping nuts

E2EW-X: Stainless steel (SUS303), E2EW-QX: Fluororesin coating (Base material: (SUS303))

Toothed washers

Zinc-plated iron

Cable

Vinyl chloride (PVC)

Main IO-Link functions 2

Operation mode switching between NO and NC, self diagnosis enabling, excessive proximity judgment distance selecting,

timer function of the control output and timer time selecting, instability output (IO-Link mode) ON delay timer time selecting

function, monitor output, operating hours read-out, readout of the sensor internal temperature, and initial reset

IO-Link

Communication

specifications 2

IO-Link

specification

Ver.1.1

Baud rate

E2EW(-Q) XBT: COM3 (230.4 kbps), E2EW(-Q) XBD: COM2 (38.4 kbps)

Data length

PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)

Minimum cycle

time

COM2: 2.3 ms, COM3: 1.0 ms

Accessories

Instruction manual, Clamping nuts, Toothed washer

PREMIUM Model