CONEXTOP NEPORT User Manual
Chapter 3 Parameters
3-1
Chapter 3 Parameters
NEPORT series products with rich functions in actual use, the user needs to configure it as
needed, select the required function, cancel the function does not required. NEPORT Series
products have a variety of means of configuration, In order to know the content of configuration,
in the following chapter, the parameters of the equipment will be introduced one by one.
Note：
Configuration tool Introduced in the follow-up such as WEB, TELNET, have the same
sub-sections of this chapter.
3.1 Basic Settings
parameter
contents
Server Name
The name of device server
Option value: any string length less than 14 bytes.
Default value: NULL
Notes: it will not change when load factory setting.
Time
Set the current time of device：
Time Zone：
User selectable time zone.
Local Time：
System time.
Time Server：
Server name used to synchronize the time.
Web Console
Enable or disable web service.
Telnet Console
Enable or disable telnet service.
Terminal Type
Some of the old terminal may be required before the
connection is established in the terminal type of transmission.
You may need to refer to the documentation to determine the
appropriate type. In most applications of modern terminals, this
is not a necessity, can not serve any purpose.
Suggested default value:VT100.
Table 3-1 basic setting parameters
New Zealand ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
