CONEXTOP NEPORT User Manual
Chapter 3 Parameters
3-6
Max Redial Times
Times of redial when failed to login, Only valid in Dial on
Demand mode.
Option value: 0-255
Default value: 0
Redial Interval
Interval time of redial when failed to login.
Option value: 0-255
Default value: 0
Idle Time
When the dial-up connection is idle after idle time, it will be
compelled to disconnect.
Option value(secs): 0-65535
Default value: 0
COM
Which serial port is used for dial-up.
Option value: vary according to firmware.
Default value: vary according to firmware.
Table 3-8 PPP dial-up
3.4.2 PPP Status
PPPoE status parameters are read-only, to display status of PPPoE dial-up connection.
parameter
contents
Link Status
Status of dial-up connection.
Option value: deactive/linking/active.
Default value: deactive.
PPP IP
IP address of dial-up connection.
PPP Gateway
Gateway of dial-up connection.
PPP DNS1
Preferred DNS address of dial-up connection.
PPP DNS2
Alternative DNS address of dial-up connection.
Table 3-9 PPP status
3.5 GPRS
3.5.1 MSC Settings
parameter
contents
Access Point Name
The
name
used to identify a general
packet
radio
service (GPRS) bearer service in the GSM mobile network.
The APN defines the type of service that is provided in the
packet data connection.
Option values: Any string provided by mobile operator.
Default value: CMNET
Service Code
Dial string.
Option values: any string provided by mobile operator.
New Zealand ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
