20 / 77 page
CONEXTOP NEPORT User Manual
Chapter 3 Parameters
3-3
Inhibition:
If you choose to use manually configure IP addresses, IP address can not the same as the others in
the same network, otherwise it will leading to unpredictable consequences.
3.2.3 Ethernet configuration
parameter
contents
Auto Negotiate
Auto-negotiation is selected, the device will auto-negotiate
with the network node of the network; uncheck it will using the
designated mode.
Option values: Enable/Disable
Default value: Enable
Speed
Netcard working speed.
Option values(bps): 10M/100M.
Default value: 10M
Duplex
Netcard working mode.
Option values: Full or Half.
Default value: Full
MAC Address
Mac address of netcard.
Option value: valid mac address in “xx.xx.xx.xx.xx.xx” format.
Default value: None.
Table 3-4 ethernet configuration
Inhibition:
In the LAN, MAC address are used to distinguish between the various devices or PC, MAC
address of device can not be the same with any other device or PC machine in the network.
3.2.4 Network Type
parameter
contents
Ethernet
Whether or not to enable ethernet
PPP
Whether or not to enable PPP dialup network
PPPoE
Whether or not to enable PPPoE dial-up network
GPRS
Whether or not to enable GPRS
Table 3-5 network type
New Zealand ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
