HCS12 datasheet(378/452 Pages) FREESCALE

378 / 452 page

S12CPUV2 Reference Manual, Rev. 4.0

378

Freescale Semiconductor

Operators (continued)

⊕ — Logical exclusive OR

× — Multiplication

÷ — Division

M —

Negation. One’s complement (invert each bit of M)

: —

Concatenate

Example: A : B means the 16-bit value formed by concatenating 8-bit accumulator A

with 8-bit accumulator B.

A is in the high-order position.

⇒ — Transfer

Example: (A)

⇒ M means the content of accumulator A is transferred to memory

location M.

⇔ — Exchange

Example: D

⇔ X means exchange the contents of D with those of X.

Address Mode Notation

INH — Inherent; no operands in object code

IMM — Immediate; operand in object code

DIR — Direct; operand is the lower byte of an address from $0000 to $00FF

EXT — Operand is a 16-bit address

REL — Two’s complement relative offset; for branch instructions

IDX — Indexed (no extension bytes); includes:

5-bit constant offset from X, Y, SP, or PC

Pre/post increment/decrement by 1 . . . 8

Accumulator A, B, or D offset

IDX1 — 9-bit signed offset from X, Y, SP, or PC; 1 extension byte

IDX2 — 16-bit signed offset from X, Y, SP, or PC; 2 extension bytes

[IDX2] — Indexed-indirect; 16-bit offset from X, Y, SP, or PC

[D, IDX] — Indexed-indirect; accumulator D offset from X, Y, SP, or PC

Machine Coding

— 8-bit direct address $0000 to $00FF. (High byte assumed to be $00).

— High-order byte of a 16-bit constant offset for indexed addressing.

— Exchange/Transfer post-byte. See Table A-5 on page 399.

— Low-order eight bits of a 9-bit signed constant offset for indexed addressing,

or low-order byte of a 16-bit constant offset for indexed addressing.

— High-order byte of a 16-bit extended address.

— 8-bit immediate data value.

— High-order byte of a 16-bit immediate data value.

— Low-order byte of a 16-bit immediate data value.

— Loop primitive (DBNE) post-byte. See Table A-6 on page 400.

— Low-order byte of a 16-bit extended address.

— 8-bit immediate mask value for bit manipulation instructions.

Set bits indicate bits to be affected.

— Program page (bank) number used in CALL instruction.

HCS12 Datasheet(PDF) 378 Page - Freescale Semiconductor, Inc

HCS12 Datasheet(HTML) 378 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL