3G5A2-RPT01-PE datasheet(22/182 Pages) OMRON

22 / 182 page

Remote I/O can be enabled by adding a SYSMAC BUS/2 Remote I/O System to

the PC. The SYSMAC BUS/2 Remote I/O System is available in two types: opti-

cal and wired.

Two Remote I/O Master Units, optical or wired, can be mounted to the CV500 or

CVM1-CPU01-EV2 CPU Rack or Expansion CPU Rack. Four Remote I/O Mas-

ter Units can be mounted to the CV1000, CV2000, or CVM1-CPU11/21-EV2

CPU Rack or Expansion CPU Rack.

Up to eight Remote I/O Slave Racks can be connected per PC.

Slaves can be used to provide up to 1,024 remote I/O points for the CV500 or

CVM1-CPU01-EV2; up to 2,048 remote I/O points for the CV1000, CV2000, or

CVM1-CPU11/21-EV2. These limits are the totals for all Slaves control by one

PC.

A Programming Device (such as the CVSS) can be connected to up to two Re-

mote I/O Slave Units for each Remote I/O Master Unit as long as a total of no

more than four Programming Devices are connected per PC.

Remote I/O Master Unit

CV500-RM211 (optical)

CV500-RM221 (wired)

CV500, CVM1-CPU01-EV2:

4 Masters max. can be mounted

CV1000, CV2000, CVM1-CPU11/21-EV2: 8 Masters max. can be mounted

CV-series

CPU Rack/Expansion CPU Rack

Remote I/O Slave

Up to 8 Slave can be con-

nected per PC for 58M

Slaves; 4 Slaves for 122M

or 54MH Slaves.

Remote I/O Slave Unit

CV500-RT211 (optical)

CV500-RT221 (wired)

SYSMAC BUS/2 Remote I/O

System

Networks and Remote I/O Systems

Section 1-6

3G5A2-RPT01-PE Datasheet(PDF) 22 Page - Omron Electronics LLC