PM0214 datasheet(138/245 Pages) STMICROELECTRONICS

138 / 245 page

The STM32 Cortex-M4 instruction set

PM0214

138/245

DocID022708 Rev 4

3.9.2

SBFX and UBFX

Signed Bit Field Extract and Unsigned Bit Field Extract.

Syntax

SBFX{cond} Rd, Rn, #lsb, #width

UBFX{cond} Rd, Rn, #lsb, #width

where:

•

‘cond’ is an optional condition code, see Conditional execution on page 64.

•

‘Rd’ is the destination register.

•

‘Rn’ is the source register.

•

‘lsb’ is the position of the least significant bit of the bitfield. lsb must be in the range 0 to

31.

•

‘width’ is the width of the bitfield and must be in the range 1 to 32-lsb.

Operation

SBFX extracts a bitfield from one register, sign extends it to 32 bits, and writes the result to

the destination register.

UBFX extracts a bitfield from one register, zero extends it to 32 bits, and writes the result to

the destination register.

Restrictions

Do not use SP and do not use PC.

Condition flags

These instructions do not affect the flags.

Examples

SBFX R0, R1, #20, #4 ; Extract bit 20 to bit 23 (4 bits) from R1 and sign

; extend to 32 bits and then write the result to R0.

UBFX R8, R11, #9, #10; Extract bit 9 to bit 18 (10 bits) from R11 and zero

; extend to 32 bits and then write the result to R8

PM0214 Datasheet(PDF) 138 Page - STMicroelectronics