AS4SD16M16 datasheet(16/52 Pages) MICROSS

16 / 52 page

SDRAM

AS4SD16M16

Rev. 2.6 04/13/15

Micross Components reserves the right to change products or specifications without notice.

WRITEs

WRITE bursts are initiated with a WRITE command, as

shown in Figure 13.

The starting column and blank addresses are provided with

the WRITE command, an auto precharge is either enabled or

disabled for that access. If auto precharge is enabled, the row

being accessed is precharged at the completion of the burst.

For the generic WRITE commands used in the following il-

lustrations, auto precharge is disabled.

During WRITE bursts, the first valid data-in element will be

registered coincident with the WRITE command. Subsequent

data elements will be registered on each successive positive

clock edge. Upon completion of a fixed-length burst, assum-

ing no other commands have been initiated, the DQs will be

ignored (see Figure 14). A full-page burst will continue until

terminated. (At the end of the page, it will wrap to the start

address and continue.)

Data for any WRITE burst may be truncated with a

subsequent WRITE command, and data for a fixed-length

WRITE burst may be immediately followed by data for a

WRITE command. The new WRITE command can be issued

on any clock following the previous WRITE command, and the

data provided coincident with the new command applies to the

new command. An example is shown in Figure 15. Data n+1

is either the last of a burst of two or the last desired of a longer

burst. The 256MB SDRAM uses a pipelined architecture and

therefore does not require the 2n rule associated with a prefetch

architecture. AWRITE command can be initiated on any clock

cycle following a previous WRITE command. Full-speed

random write accesses within a page can be performed to the

same bank, as shown in Figure 16, or each subsequent WRITE

may be preformed to a different bank.

FIGURE 13: WRITE Command

FIGURE 14: WRITE Burst

FIGURE 15: WRITE to WRITE

AS4SD16M16 Datasheet(PDF) 16 Page - Micross Components