UPSD3422_V01 datasheet(205/300 Pages) STMICROELECTRONICS

205 / 300 page

Obsolete

Product(s)

- Obsolete

Product(s)

Obsolete

Product(s)

- Obsolete

Product(s)

UPSD3422, UPSD3433, UPSD3434, UPSD3454

PSD module

205/300

The Flash memories are 16-bit wide when it is in Program Memory space and are 8-bit wide

when it is in the Data Space. When the Flash memory is configured in both “Program

Space” and “Data Space,” the Flash will drive 16-bit in a PSEN cycle and operates as an 8-

bit memory in READ or WRITE cycle.

The SRAM, csiop, and external device are always in 8-bit data space.

28.4

Runtime control register definitions (csiop)

The 39 csiop registers are defined in Table 162. The 8032 can access each register by the

address offset (specified in Table 162) added to the csiop base address that was specified

in PSDsoft Express. Do not write to unused locations within the csiop block of 256 registers,

they should remain logic zero.

Table 161.

Data width in different bus cycles(1)

x = NA

Type of bus cycle

Main Flash

Secondary

Flash

SRAM

CSIOP

External

device

PSEN cycle (program memory)

16-bit

Read or Write cycle (data memory)

8-bit

Flash Programming cycle (Flash write

or reading status)

8-bit

xxx

Table 162.

CSIOP registers and their offsets (in hexadecimal)

name

Port A

(80-pin)

Port B Port C Port D Other

Description

Link

Data In

00h

01h

10h

11h

MCU I/O input mode. Read to

obtain current logic level of pins

on Ports A, B, C, or D. No

WRITEs.

Table 178

page 234

Control

02h

03h

Selects MCUI/O or Latched

Address Out mode. Logic 0 =

MCU I/O, 1 = 8032 Addr Out.

Write to select mode. Read for

status.

Table 190

page 238

Data Out

04h

05h

12h

13h

MCU I/O output mode. Write to

set logic level on pins of Ports

A, B, C, or D. Read to check

status. This register has no

effect if a port pin is driven by

an OMC output from PLD.

Table 182

page 234

Direction

06h

07h

14h

15h

MCU I/O mode. Configures

port pin as input or output.

Write to set direction of port

pins.

Logic 1 = out, Logic 0 = in.

Read to check status.

Table 186

page 235

Obsolete

Product(s)

- Obsolete

Product(s)

UPSD3422 Datasheet(PDF) 205 Page - STMicroelectronics

UPSD3422 Datasheet(HTML) 205 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL