C-124

Multifunction Preset Counter

H7CX

I Operation in Configuration Selection Mode

Select which H7CX configuration is used (i.e., 1-stage counter, 2-stage counter, total and preset counter, batch counter, dual counter, or tachom-

eter) in configuration selection mode. The H7CX is also equipped with a DIP switch monitor function, a convenient function that enables the settings

of the DIP switch pins to be confirmed using the front display.

Note: 1. When the mode is changed to configuration selection mode, the present value is reset, outputs turns OFF, and counting (measuring)

stops.

2. Setting changes made in configuration selection mode are enabled when the mode is changed to run mode. If the configuration is

changed, the set value (or set value 1 and set value 2), OUT1 set value or OUT2 set value are initialized.

1

+

12345678

1

1

Indicates that DIP switch pin 8 is ON.

Indicates that DIP switch pin 7 is OFF.

Indicates that DIP switch pin 6 is ON.

Indicates that DIP switch pin 5 is OFF.

Indicates that DIP switch pin 4 is ON.

Indicates that DIP switch pin 3 is OFF.

Indicates that DIP switch pin 2 is ON.

Indicates that DIP switch pin 1 is ON.

Example

The configuration that can be selected depend on the model.

Counting stopped

Counting possible

Power ON

1 s min.

(See note 2.)

(See note 1.)

1

1

To change the mode to configuration selection mode, press

the

Key for 1 s min. with the

key held down. The

mode will not change if the

key is pressed first.

Select the configuration using the

keys. (

key only for 6-

digit models)

The H7CX is factory-set to the 1-stage counter configuration (2-stage

counter configuration with H7CX-AW

@/-A4W@ models).

Configuration

selection

DIP switch

monitor

(1-stage counter) (2-stage counter)

(Dual counter)

(Batch counter)

(Tachometer)

(Total and

preset counter)

The status of the DIP switch pins (1 to 8) can be confirmed using the

keys.

Note: This display is possible only if DIP switch pin 1 (DIP switch set-

tings) is set to ON (i.e., enabled).

ON

OFF