3

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY PRECAUTIONS

1. NEVER exceed the safe working load of 450 kg and only use the

motorcycle lift for its intended purpose.

2. NEVER use the lift if it has been subjected to an abnormal load or shock. It

should be removed from service immediately and fully inspected by

qualified personnel before being passed as serviceable before being used

again.

3. NEVER rely on the hydraulic ram to support the table when loaded. Always

use the locking bar to hold the table in one of the two positions provided.

4. NEVER crawl or reach under the platform unless it is mechanically locked

using the safety bar provided.

5. ALWAYS use the lift on a solid, flat, level surface.

6. ALWAYS screw down the

stabilisers before putting the table

under load.

NOTE: The castors are not designed

to take the weight of the

motorcycle but are used

merely to move the lift

quickly and easily around

the workshop. On no

account must you raise a

loaded platform unless the

stabilisers are screwed

down, and NEVER use the lift

to transport a load.

7. ALWAYS use appropriate safety

equipment such as protective

footwear when using this lift.

8. ALWAYS inspect the lift before use to ensure it is in good condition and

replace any damaged or worn parts.

9. ALWAYS use spare parts supplied by Clarke International. Using non-

standard parts could be extremely dangerous.

10. ENSURE the operator is trained in both operational and safety aspects of

using this product.

11. NEVER leave this lift unattended whilst there is a load on it.

12. NEVER allow children or bystanders anywhere near this lift whilst it is in use.